In this paper, a classification of low-dimensional nanomaterials is given, and new type of these nanomaterials — subnanophase coatings are proposed. Experimental results on the formation of a wetting layer of a transition metal on a silicon substrate by physical deposition in vacuum and results of this layer identification by the EELS method are given. Based on these results, a new approach to the formation of subnanophase coatings has been proposed by creation of an interface stresses structuring WL. The possible properties and application prospects of subnanophase coatings are considered.

Agroforestry holds the key in providing alternative economically viable livelihood development and to support mountainous farmers to adapt to climate change. Innovative agroforestry interventions integrating animal production, horticulture etc into cropping systems exist that can help farmers improve yields and build resilience for supporting livelihoods particularly among marginal communities. But, the lack of knowledge, technical know-how and other information among the farmers are major barriers in adoption of agroforestry. Millions of the farmers of mountainous regions are already wrestling with water scarcity, which would be more severe in climate change scenario. The Himalayan regions are have been considered to be highly sensitive to climate change. Indeed, Innovative agroforestry interventions have the potential to conserve natural resources, improve productivity and provide resilience to climate change. The present paper highlights the need for developing innovative agroforestry interventions to promote various alternate livelihood options through diversification, adoption of high yielding varieties and development of innovative products from forest resources.  Of these spice based agroforetry, silvi-medicinal systems, Van silk cultivation, bamboo and ringal cultivation  and development and use of farm resources based products like  bamboo based composite structures, Seabuckthorn herbal tea, Ghingaroo juice  (Crataegus crenulata) and incense products etc holds a promising potential to be explored as better options for future scenario.

Fire is one of the most serious hazards, which causes many economic, social, ecological, and human damages every year in the world. Fire in forests and natural ecosystems destroys wood, regeneration, forest vegetation, as well as soil erosion and forest regeneration problems (due to the dryness of the weather and the weakness of the soil). Awareness of the extent of the zones that have been fired is important for forest management. On the other hand, the difficulty of fieldwork due to the high cost and inaccessible roads, etc. reveals the need for using remote sensing science to solve this problem. In this research, MODIS satellite images were used to detect and determine the fire extent of Golestan province forests in northern Iran. MID13q1 and MOD13q1 images were used to detect the normal conditions of the environment. The 15-year time series data were provided for the NDVI and NDMI indicators in 2000-2015. Then, the behavior of indicators in the fire zone was studied on the day after the fire. The burned zones by the fire were specified by determining the appropriate threshold and then, they were compared to long-term normals. In the NDMI and NDVI indicators, the mean of the numeric value threshold limit for determining the burnt pixels was respectively 1.865 and 0.743 of the reduction in their normal long-term period, which are selected as fire pixels. The results showed that the NDMI index could determine the extent of the burned zone with the accuracy of 95.15%.

Attempts were made in the present study to design and develop skeletally modified ether linked tetraglycidyl epoxy resin (TGBAPSB), which is subsequently reinforced with different weight percentages of amine functionalized mullite fiber (F-MF). The F-MF was synthesized by reacting mullite fiber with 3-aminopropyltriethoxysilane (APTES) as coupling agent and the F-MF structure was confirmed by FT-IR. TGBAPSB reinforced with F-MF formulation was cured with 4,4’-diamino diphenyl methane (DDM) to obtain nanocomposite. The surface morphology of TGBAPSB-F-MF epoxy nanocomposites was investigated by XRD, SEM and AFM studies. From the study, it follows that these nanocomposite materials offer enhancement in mechanical, thermal, thermo-mechanical, dielectric properties compared to neat (TGBAPSB) epoxy matrix. Hence we recommend these nanocomposites for a possible use in advanced engineering applications that require both toughness and stiffness.

Polymers obtained from renewable sources are gaining popularity over their petroleum based counter parts in recent years due to their capability to address the environmental pollution related concerns emanating from the widespread usage of synthetic polymers. Even though the polymers from renewable sources are attractive in an environmental point of view, some of the property limitations and the high cost of these materials pose limitations for their extensive commercial applications. These aspects opened the door for a large chunk of research activities in development of polyblends and composites containing polymers from renewable sources as one of the components. Poly (lactic acid) (PLA) is one of the most discussed and commercialized polymer originated from renewable resources. Even though it has many useful properties, certain disadvantages like high brittleness, low impact resistance etc. limit the wide spread commercialization of PLA. In this review article, the recent research activities which are aimed to fill this gap by various modifications of PLA are discussed with special emphasis on the latest research advancements in the field of biodegradable and non biodegradable systems containing PLA.

The gravure printing process is widely utilized for large-scale, high-quality, multi-colored printing tasks executed at high press speeds. This includes a diverse range of products such as art books, greeting cards, currency, stamps, wallpaper, magazines, and more. This thesis addresses the fire risks associated with gravure printing, acknowledging the use of highly flammable materials and the potential for static charge-related incidents. Despite its prevalence, there is limited research on fire prevention and control in gravure printing. The study employs field observations, stakeholder interviews, and an extensive review of literature on fire risk and control in printing press operations in India. It analyzes the causes of fires using the fire triangle model, emphasizing the role of heat, combustible materials, and oxygen in fire incidents within the printing press environment. The thesis categorizes preventive measures into fire prevention and fire suppression actions, focusing on reducing fire load, static charge mitigation, and implementing firefighting systems. It observes that poor housekeeping, lack of awareness, and inadequate emergency control plans contribute significantly to fire hazards in press facilities. Additionally, the research identifies key factors such as high press temperatures, low humidity, improper storage, and inadequacies in firefighting systems as potential causes of fires. It emphasizes the need for optimal environmental conditions, proper storage practices, and effective firefighting infrastructure within press facilities. The study concludes with comprehensive guidelines for loss prevention and control, including management programs, housekeeping, operator training, pre-emergency planning, preventive maintenance, and plant security. It also addresses safety measures specific to gravure printing presses, such as automatic sprinkler systems, fire hydrant system, carbon dioxide flooding systems, and portable fire extinguishers. In summary, this thesis provides valuable insights into the multifaceted nature of fire risks in gravure printing presses and recommends a holistic approach for effective fire prevention and control.