Potassium dihydrogen phosphate, KH2PO4 (KDP) crystal is an excellent electro-optical nonlinear optical crystal with large electro-optical nonlinear coefficient, high laser damage threshold, and laser frequency doubling effect, electro-optical effect , Piezoelectric effects and other special features, widely used in inertial confinement fusion engineering (ICF) and electro-optical switching devices. Therefore, its growth mechanism, growth process and performance have been systematically studied. In the process of KDP crystal growth, it is found that the stability of the growth solution is an important factor affecting the quality of crystal growth. Therefore, in recent years, more and more research on the stability of the solution, such as the study of ph, doping, supersaturation, overheating time on the stability of the solution. Among them, the research on the doping is mostly reported, and the research on this aspect is mainly focused on two aspects. On the one hand, it is the study of the stability of the solution under doping, and the other is the effect of doping on the optical quality of the crystal. In fact, the stability of the growth solution and the quality of crystal growth is directly related to the quality, but the existing research to isolate the two researches. Therefore, the experiment will be carried out in the case of double-doped KDP solution stability, KDP crystal growth and crystal optical quality and other experiments, and in-depth analysis of the impact of solution stability and crystal optical quality of the reasons, while the solution stability and The relationship between the optical quality of the crystal is briefly analyzed.

Lianghuai Mining Area is one of the 13 large coal bases in China. It is an important coal and coal production base in China. Mine water inrush accidents occur frequently, resulting in economic and human resource losses, reflecting the importance of the study of hydrogeology in mining areas. In this paper, the hydrogeological conditions of Bozhou and Huainan Panxie mine are analyzed, and the similarities and differences between the hydrogeological conditions of the two mines are summarized. The shallow pore water group in the Bozhou area is composed of the Quaternary system of the Quaternary system (Q4d) and the upper part of the upper part of the Mao Tong group (Q3m). The lithology of the aquifer is silt, silt and fine sand. The shallow pore water group of the Panxian Pancho Formation in Huainan is composed of the Upper Pleistocene of the Quaternary system and the Holocene strata. The lithology is mainly composed of fine sand. The main sources of shallow pore water supply in the two areas are precipitation infiltration, mainly for evaporation, lateral runoff, artificial mining and deep flow and discharge to the river.

In this paper, all the forests, woodlands and trees in the administrative area of Zhaoling Township in Chuzhou City of Huai'an City were collected and analyzed. The total area of the administrative area is 4852 hectares, the forest coverage rate is 22.07%, and the forest greening rate is 26.13%. This index has exceeded 20% of the forest coverage rate of the well - off society. Tree species is particularly serious. In the forest system (pure forest), the area of pure forest of poplar is accounted for 99.9% of the whole forest area. In the four tree systems, the number of poplar trees accounted for 80% of the total number of trees in the whole tree, and the total amount of poplar trees accounted for 98%. The poplar pure forest age group structure disorders, the unit area is low. The ratio of total area of poplar pure forest in Zhongling and young forests was 92.9%, and the ratio of total area of poplar pure forest and mature forest was 7.1%. The ratio of mature forest and the ratio of mature forest was 0.7%, and the proportion of each group was obviously abnormal.

With the development of social economy, the current urban traffic problem is more prominent. In order to solve this problem very well, the idea of establishing intelligent traffic management came into being. The establishment of intelligent traffic management, cannot do without the signal launch and reception. Therefore, how to set up some wireless signal transmitting device in time to travel on the road motor vehicles to send traffic information and how to achieve full coverage of the signal and signal stability is our article to discuss the issue. For the first question, we must separate the motorway and non-motorway from all roads. Motorway lanes are usually straight and long. While the bends are usually just sidewalks or bike lanes (non-motorized lanes). So the 121 road can be clustered analysis, clustering of the two indicators for each road length (the distance between the adjacent points) and the collection point of density (by drawing, you can observe the more curved the denser the road collection point, so the road curvature into the collection point of the intensity), the result of clustering can get 48 motor lanes. And then through regress function regression and data fitting to achieve an approximate description of each type of motor vehicle description model, so that each road in a given latitude (latitude) coordinates to determine the latitude (longitude) coordinates and the corresponding altitude. For the problem of two, according to the meaning of the road to know the signal strength is only related to the distance between the sampling point and the launch device, so you can 'the motor vehicle between the signal reception is relatively close to' this indicator into ' The average of the distance between all the sampling points and the transmitting device is close to '. By reading the data will be latitude and longitude conversion distance length, so that the maximum value as small as possible. The position of the launcher can be obtained by programming by MATLAB. When considering the altitude, only the position of the transmitting device can be changed. (9.7824,56.7720), and the position coordinates when considering the altitude are D (9.7459, 56.7586, 73.5645), and the position coordinate of the signal device is B (9.7824, 56.7720). For question three, note the effect of the original signal device A on the result. We still use the average of the distance between all the sampling points of the road and the launcher to characterize the stability of the signal reception. The average distance of all non-motorized trains to the original signal device A is first determined, and then the average distance of all non-motorized lanes from the new signal device B is set, and the signal acceptance strength of the non-motorized lane can be used to characterize. And then use the same method in question two to determine the location of the new signal transmitter. Finally, the coordinates of the position of the new signal device are E (9.7459,56.7586,73.5645).

Dushan county, Guizhou province, is located in the southernmost tip of Guizhou province. It belongs to the temperate climate of the subtropical region and is one of the centers of the karst east Asia area. The total area of the county is 242220 hectares, of which 169142 hectares are rocky desertifi cation or endangered desertification state. At present, the problem of rocky desertification has seriously affected the ecological environment of the county, which is one of the important factors that restrict the local social living standard and economic development. Therefore, it is of great significance to promote the social and economic development of the county by investigating and analyzing the spatial differentiation rules, present situation and harm of rocky desertification in Dushan county.

In the current era, electromagnetic radiation is everywhere. Every day electromagnetic radiation and static electricity caused by a variety of hazards. So, anti-electromagnetic radiation and anti-static awareness gradually enjoys popular support, more attention are gained by people on the anti-electromagnetic radiation and anti-static. This caused radiation protection and anti-static clothing industry’s rise by the day. Radiation protection and anti-static clothing will enter various households to provide a certain amount of protection to the people's health. We discuss two parts in this paper, specifically from the effects of the electromagnetic radiation and electrostatic effects which started on radiation clothing and anti-static clothing. The main contents of this paper are as follows: The first part of the definition of electromagnetic radiation and its brief introduction, while explaining the types of electromagnetic radiation and electromagnetic radiation sources in daily lives, followed by the emphasis of serious harms on electromagnetic radiation on human health It is precisely because of electromagnetic radiation on people's lives have serious threat, that makes the development of radiation protection. This follows the basic introduction of the radiation suit and the development of radiation protection clothings. The development of radiation protection suits is an established industry. Materials made of radiation protection are constantly changing, but their basic working principle has not changed. Followed by the introduction of the basic principles of radiation protection clothings, we theoretically present specific analysis and demonstration. However, the theoretical analysis and practice is often consists a certain gap, so we highlight a few actual situations on the impact of radiation protection clothings. Finally, we present a simple discussion on wide range of applications of radiation protection clothings. The thought process of second part is similar as the first part, respectively, we introduce the health hazards and the impact on people's lives of electrostatic effect and static electricity . Followed by that it is the basic principles, relevant analysis and discussion of anti-static clothing Finally, we provide the detailed explanation of the application of anti-static clothing.