In order to replace conventional materials in the existing composite world, there has been a focus on adopting coir fibres, which are lightweight, adaptable, efficient, and have great mechanical qualities. This study describes the creation of environmentally responsible bio-composites with good mechanical characteristics that employ coir powder as a reinforcement, which has good interfacial integrity with an epoxy matrix. And these epoxy-coir composites supplemented with coir particles are predicted to function as a reliable substitute for traditional materials used in industrial applications. Here, untreated and alkali-treated coir fibres powder were employed as reinforcement, with epoxy resin serving as a matrix. An experimental investigation has been carried out to study the effect of coir powder reinforcement at different weight percentages (5 wt%, 10 wt%, 15 wt%, 20 wt%, 25 wt%, and 30 wt%). The morphological study, followed by a scanning electron microscope (SEM) and an optical microscope (OM), demonstrated that the powder and matrix had the strongest adhesion at 20 wt% coir powder-reinforced composite, with no voids, bubbles, or cracks. Based on the entire investigation, the polymer composite with 20 wt% reinforcement exhibited better mechanical qualities than the other combinations.

This review focuses on ferrites, which are gaining popularity with their unique properties like high electrical resistivity, thermal stability, and chemical stability, making them suitable for versatile applications both in industry and in biomedicine. This review is highly indicative of the importance of synthesis technique in order to control ferrite properties and, consequently, their specific applications. While synthesizing the materials with consideration of certain properties that help in certain methods of preparation using polyol route, green synthesis, sol-gel combustion, or other wise to tailor make certain properties shown by ferrites, this study also covers biomedical applications of ferrites, including magnetic resonance imaging (MRI), drug delivery systems, cancer hyperthermia therapy, and antimicrobial agents. This was able to inhibit the growth of all tested Gram-negative and positive bacteria as compared with pure ferrite nanoparticles without Co, Mn or Zn doping. In addition, ferrites possess the ability to be used in environmental remediation; such as treatment of wastewater which makes them useful for high-surface-area and adsorption capacity due heavy metals and organic pollutants. A critical analysis of functionalization strategies and possible applications are presented in this work to emphasize the capability of nanoferrites as an aid for the advancement both biomedical technology and environmental sustainability due to their versatile properties combined with a simple, cost effective synthetic methodology.

A novel composite material based on polymers (polyvinyl alcohol, polyvinyl butyral) and liquid crystal (4-n-pentyl-4’-cyanobiphenyl) has been developed and studied. Configuration transformations of point defects in nematic droplets under the influence of an electric field, caused by localized changes in the concentration of NLC within the polymer matrix, have been discovered and analyzed. The boundary conditions necessary for achieving a nematic structure with homogeneous alignment of the director both within the droplet and at its surface have been established, optimizing the anisotropy of light transmission in polymer-dispersed liquid crystal (PDLC) films. Additionally, polarization effects inside nematic droplets under the application of an electric field have been identified.

In order to understand the finishing effect of Waterborne Acrylic Paint under different painting methods and amount, bamboo-laminated lumber for furniture was coated with waterborne acrylic paint, then the effects of different painting methods and amount on the drying rate, smoothness, hardness, adhesion and wear resistance of the paint film were investigated. Further, the mechanism of film formation was described by thermal property analysis using thermogravimetry and differential scanning calorimeter. The results show that different painting methods have little effect on film properties, the drying time of primer and topcoat are not affected by them, which is 8/8.5 min for primer surface/solid and 6.5/7 min for topcoats. The film surface hardness and adhesion can reach B and 0 grade, the best wear resistance of the film is 51.24 mg·100 r⁻¹ when using one-layer primer one-layer topcoat. Different coating amount has great influence on film properties, the drying speed of the film increases with the increase of the painting amount. The film properties reach the best when the painting amount is 80 g/m², while too little painting amount leads to the decrease of hardness, and too much leads to the wear resistance weaken. Thermal analysis of the primer and topcoat show that water decomposition occurs at 100 ℃ and thermal decomposition of organic components occur at 350 ℃. Topcoats have better thermal stability than primers higher than that of topcoat, the topcoat displayed better thermal stability than the primer.

Objective: This study aimed to examine the psychometric properties of the 21-item Depression, Anxiety, and Stress Scale (DASS-21) in a sample of Moroccan students. Method: A total of 208 Moroccan students participated in this study. The dimensionality of the DASS-21 scale was assessed using exploratory factor analysis. Construct validity was assessed using the Stress Perception (PSS-10), State Anxiety (SAI), and Depression (CESD-10) scales. Results: Correlation analyses between Depression, Anxiety, and Stress subscales showed significant results. The exploratory factor analysis results confirmed the DASS’s three-dimensional structure. Furthermore, correlation analyses revealed positive correlations between the DASS-18 sub-dimensions and the three scales for Stress (PSS-10), Anxiety (SAI), and Depression (CESD-10). Conclusion: In line with previous work, the results of this study suggest that the DASS-18 reflect adequate psychometric properties, making it an appropriate tool for use in the university context.

The current manuscript overviews the potential of inimitable zero dimensional carbon nanoentities, i.e., nanodiamonds, in the form of hybrid nanostructures with allied nanocarbons such as graphene and carbon nanotube. Accordingly, two major categories of hybrid nanodiamond nanoadditives have been examined for nanocompositing, including nanodiamond-graphene or nanodiamond/graphene oxide and nanodiamond/carbon nanotubes. These exceptional nanodiamond derived bifunctional nanocarbon nanostructures depicted valuable structural and physical attributes (morphology, electrical, mechanical, thermal, etc.) owing to the combination of intrinsic features of nanodiamonds with other nanocarbons. Consequently, as per literature reported so far, noteworthy multifunctional hybrid nanodiamond-graphene, nanodiamond/graphene oxide, and nanodiamond/carbon nanotube nanoadditives have been argued for characteristics and potential advantages. Particularly, these nanodiamond derived hybrid nanoparticles based nanomaterials seem deployable in the fields of electromagnetic radiation shielding, electronic devices like field effect transistors, energy storing maneuvers namely supercapacitors, and biomedical utilizations for wound healing, tissue engineering, biosensing, etc. Nonetheless, restricted research traced up till now on hybrid nanodiamond-graphene and nanodiamond/carbon nanotube based nanocomposites, therefore, future research appears necessary for further precise design varieties, large scale processing, and advanced technological progresses.