Nanoparticle V₂O₅ is prepared by the measurement of X-ray diffraction (XRD) and atomic force microscopy (AFM) analyses. The crystallite size = 19.59 nm, optical energy gap = 2.6 eV, an average particle size of 29.58 nm and, RMS roughness of ~6.8 nm. Also, Fourier transformer infrared spectrophotometer (FTIR) showed a porous free morphology with homogeneity and uniformity on the sample surface. The film surface exhibited no apparent cracking and, the grains exhibited large nicely separated conical columnar growth combined grains throughout the surface with coalescence of some columnar grains at a few places. The fabrication of a thin film of V₂O₅ NPs/PSi heterojunction photodetector was characterized and investigated.

The environmental issue of single-use plastic is extremely discussed due to waste accumulation and the consumption of non-renewable resources. This study aims to investigate the properties of bioplastic compared to petroleum-based plastic. Two stages of stretch blow molding were used to fabricate polyethylene terephthalate (PET) and bio-polyethylene terephthalate (Bio-PET) bottles. The shelf life extension of chili sauce paste stored in PET and Bio-PET containers with an oxygen scavenger at 45 ℃ in an accelerated condition was investigated. After twelve weeks, the chili sauce paste stored in the container bottle was observed. PET and Bio-PET bottles without oxygen scavengers were also determined as a control for comparison. The result showed that both PET and Bio-PET bottles with oxygen scavengers could prolong the quality of chili sauce paste similarly, meaning that PET could be replaced by Bio-PET as a chili sauce paste container. Other properties, such as thickness gauge, color, leak test, drop test, and close-open force of the container bottle, were also verified to check the product quality standard.

Recently, Agile project management has received significant academic and industry attention from due to its advantages, such as decreased costs and time, increased effectiveness, and adaptiveness towards challenging business environments. This study primarily aims to investigate the relationship between the success factors and Agile project management methodology adoption and examine the moderating effect of perceived compatibility. The technology-organization-environment (TOE) framework and technology acceptance theories (UTAUT, IDT, and TAM) were applied as the theoretical foundation of the current study. A survey questionnaire method was employed to achieve the study objectives, while quantitative primary data were gathered using a carefully designed methodological approach focusing on Omani oil and gas industry. The PLS-SEM technique and SmartPLS software were used for hypotheses testing and data analysis. Resultantly, readiness, technology utilization, organizational factors, and perceived compatibility were the significant factors that promoted Agile methodology adoption in the oil and gas industry. Perceived compatibility moderated the relationship between success factors and Agile methodology. The findings suggested that people, technology, and organizational factors facilitate the Agile methodology under the technology acceptance theories and frameworks. Relevant stakeholders should adopt the study outcomes to improve Agile methodology adoption.

Water splitting has been one of the potential techniques as a clean and renewable energy resource for the fulfillment of world energy demands. One of the major aspects of this procedure is the exploitation of efficient and inexpensive electrocatalysts due to the fact that the water oxidation procedure is accompanied by a delayed reaction. In this research, ZnO-CoFe₂O₄ nanostructure was successfully synthesized via the green method and green resources from cardamom seeds and ginger peels for oxygen evolution reaction (OER). The modified Glassy carbon electrode (GCE) with ZnO-CoFe₂O₄ is effective for the electrochemical water oxidation interaction since it has sufficient electrical strength and excellent catalytic performance. The creation of rice-like and small granular structures of ZnO-CoFe₂O₄ nano-catalysts was confirmed by characterization methods such as XRD, FESEM, EDS and MAP. According to the achieved results, in the electrolysis of water, with in-cell voltage of 1.40 V and 50 mA cm^–2 for current density in a 0.1 M KOH electrolyte and OER only has 170 mV overpotentials.

Broad-spectrum antibiotics, such as tetracyclines, are used to treat and manage a range of infectious disorders. Since the kidneys are the primary organs responsible for excreting tetracyclines, clinicians should refrain from prescribing them to patients who have renal failure. Tetracyclines are one of the clinical waste products of today. One of the biggest problems in the field of pollution of the environment today is the persistence of different pharmaceutical residues, drug residues, pesticides, and metal ion species of the new-generation pollutants in surfaces and groundwater. In the present work, carboxymethyl cellulose (CMC)-CuO nanoparticles (CMC-CuO NPs) were synthesized using CuO NPs within different amounts of CMC (0.5, 1.0, 1.5 and 2.0 g) at 85 °C. The synthesized nanoparticles were characterized by XRD, FT IR, SEM, and TG-DTA analysis. According to XRD and SEM, the crystallize size and morphology influenced the dosage of CMC. FT-IR analysis confines the layer of CMC to the CuO nanoparticle surface. TG-DTA results indicated that the CMC content of CMC-CuO NPs was between the range of 69% and 75% by weight. The effects of some parameters such as initial concentration, pH, adsorbent dosage, and contact time on the adsorption of tetracycline from aqueous model solutions on CMC-CuO NPs were investigated with batch studies. It was found that the removal of tetracycline was obtained about 80% with optimized parameters of 10 mg/L concentration, 180 min contact time, 5 pH, and 0.3 g/25 mL dose. The synthesized CMC-CuO NPs nanocomposite may be a promising material for the removal of tetracycline in environmental pollution and toxicology.

The work is devoted to the numerical solution of the initial boundary value problem for the heat equation with a fractional Riesz derivative. Explicit and implicit difference schemes are constructed that approximate the boundary value problem for the heat equation with a fractional Riesz derivative with respect to the coordinate. In the case of an explicit difference scheme, a condition is obtained for the time step at which the difference scheme converges. For an implicit difference scheme, a theorem on unconditional convergence is proved. An example of a numerical calculation using an implicit difference scheme is given. It has been established that when passing to a fractional derivative, the process of heat propagation slows down.