Chkhartishvili L, Mikeladze A, Chedia R, et al. Synthesizing fine-grained powders of complex compositions B4C-TiB2-WC-Co. Solid State Sciences. 2020; 108: 106439. doi: 10.1016/j.solidstatesciences.2020.106439
Chkhartishvili L, Mikeladze A, Tsagareishvili O, et al. Advanced boron carbide matrix nanocomposites obtained from liquid-charge: Focused review. Condensed Matter. 2023; 8(2): 37. doi: 10.3390/condmat8020037
Shabalin IL. Refractory Carbides III (W Carbides). In: Ultra-High Temperature Materials IV. Cham, Springer Nature; 2022. doi: 10.1007/978-3-031-07175-1
Manzar R, Saeed M, Shahzad U, et al. Recent advancements in boron carbon nitride (BNC) nanoscale materials for efficient supercapacitor performances. Progress in Materials Science. 2024; 144: 101286. doi: 10.1016/j.pmatsci.2024.101286
Singh M, Singh H, Sharma Y, et al. Review on various techniques for the development of thin film boron nitride coating on metal surfaces. AIP Conference Proceedings. 2024; 2986: 020024. doi: 10.1063/5.0192656
Mallia B, Dearnley PA. Exploring new W-B coating materials for the aqueous corrosion-wear protection of austenitic stainless steel. Thin Solid Films. 2013; 549: 204-215. doi: 10.1016/j.tsf.2013.09.035
Gromilov SA, Kinelovskii SA, Alekseev AV, et al. Investigation of W2B and β-WB high-temperature phases in coatings produced by a shaped charge explosion. Journal of Structural Chemistry. 2010; 51(6): 1126-1131. doi: 10.1007/s10947-010-0171-3
Gonzalez Szwacki N. The structure and hardness of the highest boride of tungsten, a borophene-based compound. Scientific Reports. 2017; 7(1). doi: 10.1038/s41598-017-04394-1
Sorokin OY, Kuznetsov BY, Lunegova YU, et al. High-temperature composites with a multi-layered structure (Review) (Russian). Proceedings of VIAM. 2020; 88(4-5): 42-53. doi: 10.18577/2307-6046-2020-0-45-42-53
Mohammadi R, Xie M, Lech AT, et al. Toward inexpensive superhard materials: Tungsten tetraboride-based solid solutions. Journal of the American Chemical Society. 2012; 134(51): 20660-20668. doi: 10.1021/ja308219r
Ma K, Cao X, Yang H, et al. Formation of metastable tungsten tetraboride by reactive hot-pressing. Ceramics International. 2017; 43(12): 8551-8555. doi: 10.1016/j.ceramint.2017.03.059
Syrovatko YV. Calculation of the entropy of the eutectic phases WC and W2C in alloy W-C by the method of statistical processing of photo-images (Russian). Ukrainian Applied Physics. 2020; 4: 79-84.
Mazo I, Molinari A, Sglavo VM. Electrical resistance flash sintering of tungsten carbide. Materials & Design. 2022; 213: 110330. doi: 10.1016/j.matdes.2021.110330
Yang Y, Zhang C, Wang D, et al. Additive manufacturing of WC-Co hardmetals: A review. The International Journal of Advanced Manufacturing Technology. 2020; 108(5-6): 1653-1673. doi: 10.1007/s00170-020-05389-5
Mannesson K, Borgh I, Borgenstam A, et al. Abnormal grain growth in cemented carbides—Experiments and simulations. International Journal of Refractory Metals and Hard Materials. 2011; 29(4): 488-494. doi: 10.1016/j.ijrmhm.2011.02.008
Pereira P, Vilhena LM, Sacramento J, et al. Abrasive wear resistance of WC-based composites, produced with Co or Ni-rich binders. Wear. 2021; 482-483: 203924. doi: 10.1016/j.wear.2021.203924
Soria-Biurrun T, Lozada-Cabezas L, Navarrete-Cuadrado J, et al. Densification of WC-Fe-Ni-Co-Cr cemented carbides processed by HIP after sintering: Effect of WC powder particle size. International Journal of Refractory Metals and Hard Materials. 2023; 110: 105994. doi: 10.1016/j.ijrmhm.2022.105994
Ha GH, Li GG, Yan MC, et al. Synthesis of WC-TiC-Co nanopowder by mechano-chemical process. In: Euro PM Conference Proceedings. Shrewsbury; 2006. pp. 97-102.
Dutkiewicz J, Rogal L, Bobrowski P, et al. The effect of substitution of WC by TiC in WC-Co composite tool materials on microstructure and mechanical properties. Chiang Mai Journal of Science. 2017; 44(4): 1714-1721.
Bogodukhov SI, Kozik ES, Svidenko EV. Thermal hardening of hard alloy T15K6. Industrial Laboratory Diagnostics of Materials. 2017; 83(12): 38-42. doi: 10.26896/1028-6861-2017-83-12-38-42
Falkovsky VA, Klyachko LI, Glushkov VN, et al. Multi-carbide hardmetals. In: Kneringer G, Rodhammer P, Wildner H (editors). Powder Metallurgical High Performance Materials, Proceedings of the 15th International Plansee Seminar 2001; Reutte, Austria; Plansee Holding AG; 2011. pp. 29-34.
Falkovsky V, Ebiagoveschenski Y, Glushkov V, et al. Nanocrystalline WC-Co hardmetals produced by plasmochemical method. In: Kneringer G, Rodhammer P, Wildner H (editors). Powder Metallurgical High Performance Materials, Proceedings of the 15th International Plansee Seminar 2001; Reutte, Austria; Plansee Holding AG; 2011. pp. 91-96.
Ruziev UN, Guro VP, Safarov YT, et al. Doping of hard alloy VK-6 with vanadium carbide (Russian). Universum: Chemistry and Biology. 2019; 8(62).
Li X, Zhang J, Zhang Q, et al. Microstructure Evolution and Hardness Improvement of WC-Co Composites sintered with Fe substituting part of Co binder. Coatings. 2023; 13(1): 116. doi: 10.3390/coatings13010116
Yang J, Yue Y, Lv H, et al. Effect of adding intermediate layers on the interface bonding performance of WC-Co diamond-coated cemented carbide tool materials. Molecules. 2023; 28(16): 5958. doi: 10.3390/molecules28165958
Tanaka Y, Sato H, Eryu O. Structural modification of WC-Co cutting tools by laser doping treatment. Heliyon. 2023; 9(9): e19930. doi: 10.1016/j.heliyon.2023.e19930
Zhang C, Song J, Jiang L, et al. Fabrication and tribological properties of WC-TiB2 composite cutting tool materials under dry sliding condition. Tribology International. 2017; 109: 97-103. doi: 10.1016/j.triboint.2016.12.029
Song J, Huang C, Zou B, et al. Effects of sintering additives on microstructure and mechanical properties of TiB2-WC ceramic-metal composite tool materials. International Journal of Refractory Metals and Hard Materials. 2012; 30(1): 91-95. doi: 10.1016/j.ijrmhm.2011.07.008
Chkhartishvili L, Mikeladze A, Chedia R, et al. Combustion synthesis of boron carbide matrix for superhard nanocomposites production. In: Advances in Combustion Synthesis and Technology. Bentham Science Publishers; 2022. pp. 66-95. doi: 10.2174/9789815050448122010007
Barbakadze N, Chkhartishvili L, Mikeladze A, et al. Method of obtaining multicomponent fine-grained powders for boron carbide matrix ceramics production. Materials Today: Proceedings. 2022; 51: 1863-1871. doi: 10.1016/j.matpr.2021.08.013
Chkhartishvili L, Mikeladze A, Jalabadze N, et al. New low-temperature method of synthesis of boron carbide matrix ceramics ultra-dispersive powders and their spark plasma sintering. Solid State Phenomena. 2022; 331: 173-184. doi: 10.4028/p-8n6hzy
Ozer SC, Buyuk B, Tugrul AB, et al. Gamma and neutron shielding behavior of spark plasma sintered boron carbide-tungsten based composites. In: TMS 145th Annual Meeting & Exhibition. Cham, Springer International Publishing; 2016. pp. 449-456. doi: 10.1007/978-3-319-48254-5
Zhang W, Yamashita S, Kita H. Progress in pressureless sintering of boron carbide ceramics—A review. Advances in Applied Ceramics. 2019; 118(4): 222-239. doi: 10.1080/17436753.2019.1574285
Sugiyama S, Taimatsu H. Preparation of WC-WB-W2B composites from B4C-W-WC powders and their mechanical properties. Materials Transactions, 2002; 43(5): 1197-1201. doi: 10.1016/S0955-2219(03)00253-X
Tamizifar H, Hadian AM, Tamizifar M. The comparison between boron carbide (B4C) with other common inhibitors on physical and mechanical properties of WC/Co. International Journal of Modern Physics: Conference Series. 2012; 05: 102-110. doi: 10.1142/s2010194512001900
Taran AV, Garkusha IE, Taran VS, et al. Structure and properties of B4C coatings obtained by RF sputtering with external magnetic field. In: Nanomaterials and Nanocomposites, Nanostructure Surfaces, and Their Applications. Cham, Springer Nature; 2021. pp. 51-57. doi: 10.1007/978-3-030-51905-6_5
Chkhartishvili L, Chedia R, Tsagareishvili O, et al. Preparation of neutron-capturing boron-containing nanosystems. In: Proceedings of the 9th International Conference & Exhibition on Advanced and Nanomaterials; 24-26 October 2022; Victoria, Canada. pp. 1-15.
Chkhartishvili L, Makatsaria S, Gogolidze N. Boron-containing fine-dispersive composites for neutron-therapy and neutron-shielding. In: Proceedings of the International Scientific-Practical Conference “Innovations and Modern Challenges 2022”; 18-19 November 2022; Tbilisi, Georgia. pp. 221-226.
Nabakhtiani G, Chkhartishvili L, Gigineishvili A, et al. Attenuation of gamma-radiation concomitant neutron-absorption in boron-tungsten composite shields. Nano Studies. 2013; 8: 259-266.
Evans BR, Lian J, Ji W. Evaluation of shielding performance for newly developed composite materials. Annals of Nuclear Energy. 2018; 116: 1-9. doi: 10.1016/j.anucene.2018.01.022
Chkhartishvili L. Boron-contained nanostructured materials for neutron-shields. In: Nanostructured Materials for the Detection of CBRN. Dordrecht, Springer Science; 2018. pp. 133-154. doi: 10.1007/978-94-024-1304-5_11
Martin PM. Active thin films: Applications for graphene and related materials. Vacuum Technology & Coating. 2018; 19(11): 6-14.
Dai M, Zhang Z, Zhu J, et al. Influence of interface roughness on reflectivity of tungsten/boron-carbide multilayers with variable bi-layer number by X-ray reflection and diffuse scattering. Chinese Optics Letters. 2009; 7(8): 738-740. doi: 10.3788/col20090708.0738
Ma K, Shi X, Cao X, et al. Mechanical, electrical properties and microstructures of hot-pressed B4C-WB2 composites. Ceramics International. 2022; 48(14): 20211-20219. doi: 10.1016/j.ceramint.2022.03.300
Silvestroni L, Failla S, Gilli N, et al. Disclosing small scale length properties in core-shell structured B4C-TiB2 composites. Materials & Design. 2021; 197: 109204. doi: 10.1016/j.matdes.2020.109204
Hofmann H, Petzow G. Structure and properties of reaction hot-pressed B4C-TiB2-W2B5 materials. Journal of the Less-Common Metals. 1986; 117(1-2): 121-127. doi: 10.1016/0022-5088(86)90020-2
Cai KF, Nan CW. The influence of W2B5 addition on microstructure and thermoelectric properties of B4C ceramic. Ceramic International. 2000; 26: 523-527. doi: 10.1016/S0272-8842(99)00089-9
Yeh CL, Wang HJ. Preparation of tungsten borides by combustion synthesis involving borothermic reduction of WO3. Ceramic International. 2011; 37: 2597-2601. doi: 10.1016/j.ceramint.2011.04.006
Yin J, Huang Z, Liu X, et al. Microstructure, mechanical and thermal properties of in situ toughened boron carbide-based ceramic composites co-doped with tungsten carbide and pyrolytic carbon. Journal of the European Ceramic Society. 2013; 33(10): 1647-1654. doi: 10.1016/j.jeurceramsoc.2013.01.009
Ozer SC, Turan S, Sahin FC. Mechanical and microstructural properties of spark plasma sintered B4C-W2B5 composites. In: Proceedings of the 18th International Metallurgy and Materials Congress - IMMC 2016; 29 September-1 October 2016; Istanbul, Turkey. pp. 62-66.
Deng J, Zhou J, Feng Y, Ding Z, Microstructure and mechanical properties of hot-pressed B4C/(W,Ti)C ceramic composites. Ceramic Interational. 2002; 28(4): 425-430. doi: 10.1016/S0272-8842(01)00113-4
Chkhartishvili L, Mikeladze A, Tsagareishvili O, et al. Effect of cobalt additive on phases formation in boron carbide matrix composites B4C-(Ti,Zr)B2-W2B5. Solid State Sciences. 2023; 145: 107339. doi: 10.1016/j.solidstatesciences.2023.107339
Chang M, Leung C, Wang DN, et al. Process for CVD Deposition of Tungsten Layer on Semiconductor Wafer. US Patent 5028565, 2 July 1991.
Kim SH. Deposition of tungsten thin film on silicon surface by low pressure chemical vapor deposition method. Journal of Korean Chemical Society. 1994; 38(7): 473-479.
Plyushcheva SV, Mikhailov GM, Shabel’nikov LG, et al. Tungsten thin-film deposition on a silicon wafer: The formation of silicides at W-Si interface. Inorganic Materials. 2009; 45(2): 140-144. doi: 10.1134/s002016850902006x
Kim HJ, Lee JH, Sohn IH, et al. Preparation of tungsten metal film by spin coating method. Korea-Australia Rheology Journal. 2002; 14(2): 71-76.
Singla G, Singh K, Pandey OP. Structural and thermal properties of in-situ reduced WO3 to W powder. Powder Technology. 2013; 237: 9-13. doi: 10.1016/j.powtec.2013.01.008
Wang Y, Long BF, Liu CY, et al. Evolution of reduction process from tungsten oxide to ultrafine tungsten powder via hydrogen. High Temperature Materials and Processes. 2021; 40(1): 171-177. doi: 10.1515/htmp-2021-0017
Yu ML, Ahn KY, Joshi RV. Surface reactions in the chemical vapor deposition of tungsten using WF6 and SiH4 on Al, PtSi, and TiN. Journal of Applied Physics. 1990; 67(2): 1055-1061. doi: 10.1063/1.345791
Gao J, Chan LH, Wongsenakhum P. Methods for Improving Uniformity and Resistivity of Thin Tungsten Films. US Patent 7655567B1, 2 February 2010.
Yang M, Aarnink AAI, Kovalgin AY, et al. Comparison of tungsten films grown by CVD and hot-wire assisted atomic layer deposition in a cold-wall reactor. Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films. 2015; 34(1). doi: 10.1116/1.4936387
Dippel AC, Schneller T, Lehmann W, et al. Tungsten coatings by chemical solution deposition for ceramic electrodes in fluorescent tubes. Journal of Materials Chemistry. 2008; 18(29): 3501. doi: 10.1039/b802686f
Cao P, Cao JP, Cao JH. Boron carbide ceramic metallization preparation method (Chinese). China Patent CN110981550B, 7 December 2021.
Guldamashvili A, Nardaya Y, Nebieridze T, et al. Mechanical properties of tungsten implanted with boron and carbon ions. Journal of Materials Science and Engineering A. 2017; 7(3/4): 82-88. doi: 10.17265/2161-6213/2017.3-4.003
Zinovev A, Terentyev D, Chang CC, et al. Effect of neutron irradiation on ductility of tungsten foils developed for tungsten-copper laminates. Nuclear Materials and Energy. 2022; 30: 101133. doi: 10.1016/j.nme.2022.101133
Shapoval AA, Dragobetskii VV, Savchenko IV. Analysis of processes of shock-wave regeneration of solid alloys (Russian). Kharkiv National Technical University Bulletin. 2018; 31(1306): 100-105.
