1.Abdulmalik SS, Ahmad R. Fabrication of AA6061-0/RHA Surface Composite via Friction Stir Processing. Applied Mechanics and Materials. 2014; 660: 214-218. doi: 10.4028/www.scientific.net/amm.660.214
2.Adediran AA, Alaneme KK, Oladele IO, Akinlabi ET. Wear characteristics of aluminium matrix composites reinforced with Si-based refractory compounds derived from rice husks. Stojanovic BCogent Engineering. 2020; 7(1). doi: 10.1080/23311916.2020.1826634
3.Adediran AA, Alaneme KK, Oladele IO, Akinlabi, ET. Microstructural characteristics and mechanical behaviour of aluminium matrix composites reinforced with Si-based refractory compounds derived from rice husk. Sánchez JCogent Engineering. 2021; 8(1). doi: 10.1080/23311916.2021.1897928
4.Ahamed AA, Ahmed R, Hossain MB, Billah M. Fabrication and Characterization of Aluminium-Rice Husk Ash Composite Prepared by Stir Casting Method. Rajshahi University Journal of Science and Engineering. 2016; 44: 9-18. doi: 10.3329/rujse.v44i0.30361
5.Udoye NE, Nnamba OJ, Fayomi OSI, et al. Corrosion Performance of AA6061/Rice Husk Ash Composite for Engineering Application. IOP Conference Series: Materials Science and Engineering. 2021; 1107(1): 12121. doi: 10.1088/1757-899x/1107/1/0121211.
6.Aigbodion VS, Ozor PO, Eke MN, Nwoji CU. Explicit microstructure, corrosion, and stress analysis of value-added Al-3.7%Cu-1.4%Mg/1.5% rice husk ash nanoparticles for pump impeller application. Chemical Data Collections. 2021; 33: 100675. doi: 10.1016/j.cdc.2021.100675
7.Alaneme KK, Adewale TM. Influence of rice husk ash-silicon carbide weight ratios on the mechanical behaviour of Al-Mg-Si alloy matrix hybrid composites. Tribology in Industry. 2013; 35(2): 163. doi: 10.1016/j.jmrt.2013.03.012
8.Alaneme KK, Akintunde IB, Olubambi PA, Adewale TM. Fabrication characteristics and mechanical behaviour of rice husk ash–Alumina reinforced Al-Mg-Si alloy matrix hybrid composites. Journal of Materials Research and Technology. 2013; 2(1): 60-67. doi: 10.1016/j.jmrt.2013.03.012
9.Alaneme KK, Olubambi PA. Corrosion and wear behaviour of rice husk ash—Alumina reinforced Al–Mg–Si alloy matrix hybrid composites. Journal of Materials Research and Technology. 2013; 2(2): 188-194. doi: 10.1016/j.jmrt.2013.02.005
10.Alaneme KK, Sanusi KO. Microstructural characteristics, mechanical and wear behaviour of aluminium matrix hybrid composites reinforced with alumina, rice husk ash and graphite. Engineering Science and Technology, an International Journal. 2015; 18(3): 416-422. doi: 10.1016/j.jestch.2015.02.003
11.Alaneme KK, Anabaranze YO, Oke SR. Softening resistance, dimensional stability and corrosion behaviour of alumina and rice husk ash reinforced aluminium matrix composites subjected to thermal cycling. Tribology in Industry, 2015; 37(2): 204.
12.Alaneme KK, Ajayi OJ. Microstructure and mechanical behaviour of Al-Mg-Si alloy matrix hybrid composites reinforced with rice husk ash and silicon carbide. Journal of King Saud University - Engineering Sciences. 2017; 29(2): 172-177. doi: 10.1016/j.jksues.2015.06.004
13.Alaneme KK, Bodunrin MO, Awe AA. Microstructure, mechanical and fracture properties of groundnut shell ash and silicon carbide dispersion strengthened aluminium matrix composites. Journal of King Saud University - Engineering Sciences. 2018; 30(1): 96-103. doi: 10.1016/j.jksues.2016.01.001
14.Ali I, Motgi P. A study on mechanical properties of concrete incorporating rice husk ash as partial replacement of cement. Materials Today: Proceedings, 2021; 47: 5525-5530.
15.Alweendo ST, Shongwe MB, Olubambi PA, Potgieter JH. Spark plasma sintering of Al-SiC metal matrix composites: a review. Journal of Materials Research and Technology, 2020; 9(5): 10129-10147.
16.Andrade-Tacca CA, Andrade-Tacca MC, Rojas R. Use of rice husk ash in the production of sustainable concrete. Revista de la Construcción, 2019; 18(2): 245-256.
17.Arora S, Sharma S. Influence of rice husk ash on mechanical properties of aluminium matrix composites: a review. Materials Today: Proceedings, 2020; 21: 1450-1455.
18.Arora S, Sharma S. Mechanical and tribological properties of rice husk ash reinforced Al-4.5%Cu alloy composites processed by spark plasma sintering. Silicon, 2021; 13(8): 2675-2688.
19.Awad AY, Moosa A, Al-Mosawi, AI. Effect of rice husk ash addition on mechanical properties of aluminium matrix composite. International Journal of Mechanical Engineering and Technology, 2018; 9(6): 456-463.
20.Bahrami A, Pech-Canul MI, Soltani N. Fabrication and properties of Al/SiC/RHA hybrid composites by pressureless infiltration. Materials Science Forum, 2015; 828-829: 367-372.
21.Bahrami A, Pech-Canul MI, Gutiérrez CA, Soltani N. Microstructure and properties of bilayer-graded Al-matrix composites by one-step pressureless infiltration of B4C/rice-husk ash preforms. MRS Online Proceedings Library, 2016; 1820: imrc2015s6d-0011.
https://doi.org/10.1557/opl.2016.68
22.Bahrami A, Pech-Canul MI, Soltani N, et al. Tailoring microstructure and properties of bilayer-graded Al/B4C/MgAl2O4 composites by single-stage pressureless infiltration. Journal of Alloys and Compounds. 2017; 694: 408-418. doi: 10.1016/j.jallcom.2016.09.284
23.Bahrami A, Soltani N, Soltani S, et al. Mechanical, thermal and electrical properties of monolayer and bilayer graded Al/SiC/rice husk ash (RHA) composite. Journal of Alloys and Compounds. 2017; 699: 308-322. doi: 10.1016/j.jallcom.2016.12.339
24.Bahrami A, Soltani N, Pech-Canul MI, et al. Bilayer graded Al/B 4 C/rice husk ash composite: Wettability behavior, thermo-mechanical, and electrical properties. Journal of Composite Materials. 2018; 52(27): 3745-3758. doi: 10.1177/0021998318769993
25.Parveez B, Maleque MA, Jamal NA. Influence of agro-based reinforcements on the properties of aluminum matrix composites: a systematic review. Journal of Materials Science. 2021; 56(29): 16195-16222. doi: 10.1007/s10853-021-06305-2
26.Singari RM, Mathiyazhagan K, Kumar H, et al. Advances in Manufacturing and Industrial Engineering: Select Proceedings of ICAPIE 2019. Springer Nature Singapore; 2021. doi: 10.1007/978-981-15-8542-5
27.Yadav AK, Pandey KM, Dey A. Aluminium Metal Matrix Composite with Rice Husk as Reinforcement: A Review. Materials Today: Proceedings. 2018; 5(9): 20130-20137. doi: 10.1016/j.matpr.2018.06.381
28.Chandrasekhar S, Satyanarayana KG, Pramada PN, Raghavan P, Gupta TN. Review processing, properties and applications of reactive silica from rice husk-an overview. Journal of Materials Science, 2003; 38(15): 3159-3168.
https://doi.org/10.1023/A:1025157114800
30.Real C, Alcalá MD, Criado JM. Preparation of Silica from Rice Husks. Journal of the American Ceramic Society. 1996; 79(8): 2012-2016. doi: 10.1111/j.1151-2916.1996.tb08931.x
31.Soltani N, Bahrami A, Pech-Canul MI, et al. Review on the physicochemical treatments of rice husk for production of advanced materials. Chemical Engineering Journal. 2015; 264: 899-935. doi: 10.1016/j.cej.2014.11.056
32.Jyothi PN, Kumar B. Comparison of mechanical properties of Al-5% Si alloy reinforced with cow dung ash and rice husk ash. International Journal of Latest Research in Engineering and Technology, 2015; 1: 55-58.
33.Holzschuh GG, Dörr DS, Moraes JAR, et al. Metal matrix production: Casting of recycled aluminum cans and incorporation of rice husk ash and magnesium. Journal of Composite Materials. 2020; 54(22): 3229-3241. doi: 10.1177/0021998320911964
34.Das S, Dan TK, Prasad SV, et al. Aluminium alloy—rice husk ash particle composites. Journal of Materials Science Letters. 1986; 5(5): 562-564. doi: 10.1007/bf01728691
35.Dora SP, Chintada S, Palukuri TR, et al. Energy dissipation in WC-Co coated A356.2/RHA composites. Engineering Science and Technology, an International Journal. 2020; 23(5): 1285-1290. doi: 10.1016/j.jestch.2020.04.001
36.Escalera-Lozano R, Gutiérrez CA, Pech-Canul MA, et al. Degradation of Al/SiCp composites produced with rice-hull ash and aluminum cans. Waste Management. 2008; 28(2): 389-395. doi: 10.1016/j.wasman.2006.12.005
37.Durowoju MO, Agunsoye JO, Mudashiru LO, et al. Optimization of Stir Casting Process Parameters to Improve the Hardness Property of Al/RHA Matrix Composites. European Journal of Engineering and Technology Research. 2017; 2(11): 5-12. doi: 10.24018/ejeng.2017.2.11.498
38.Muni RN, Singh J, Kumar V, Sharma S. Parametric optimization of rice husk ash, copper, magnesium reinforced aluminium matrix hybrid composite processed by EDM. ARPN Journal of Engineering and Applied Sciences, 2019; 14: 3832-3839.
39.Muni RN, Singh J, Kumar V, Sharma S. Influence of rice husk ash, Cu, Mg on the mechanical behaviour of Aluminium Matrix hybrid composites. International Journal of Applied Engineering Research, 2019; 14(8): 28-34.
40.Guo Z, Chen Z, Yang X, et al. The Influence of Rice Husk Ash Incorporation on the Properties of Cement-Based Materials. Materials. 2025; 18(2): 460. doi: 10.3390/ma18020460
41.Hamada HM, Al-Attar A, Beddu S, et al. Impact of rice husk ash on geopolymer concrete: A literature review and future directions. Case Studies in Construction Materials. 2025; 22: e04476. doi: 10.1016/j.cscm.2025.e04476
42.Jing Y, Lee JC, Moon WC, Ng JL, Yew MK, Jin Y. Durability and environmental evaluation of rice husk ash sustainable concrete containing carbon nanotubes. Scientific Reports, 2025; 15(1), 4352.
https://doi.org/10.1038/s41598-025-88927-z
43.Mishra AK. Machine learning-based prediction of coefficient of friction and specific wear rate in aluminum-based metal matrix composites. Tribology - Materials, Surfaces & Interfaces. 2025; 20(1): 31-42. doi: 10.1177/17515831251401637
44.Saravanan SD, Senthilkumar M. Prediction of tribological behaviour of rice husk ash reinforced aluminum alloy matrix composites using artificial neural network. Russian Journal of Non-Ferrous Metals. 2015; 56(1): 97-106. doi: 10.3103/s1067821215010174
45.Vinod B, Ramanathan S, Anandajothi M. Effect of Organic and Inorganic Reinforcement on Tribological Behaviour of Aluminium A356 Matrix Hybrid Composite. Journal of Bio- and Tribo-Corrosion. 2018; 4(3). doi: 10.1007/s40735-018-0157-9
46.Vinod B, Ramanathan S, Ananthi V, et al. Fabrication and Characterization of Organic and In-Organic Reinforced A356 Aluminium Matrix Hybrid Composite by Improved Double-Stir Casting. Silicon. 2018; 11(2): 817-829. doi: 10.1007/s12633-018-9881-5
47.Krishnarao RV, Subrahmanyam J, Jagadishkumar T. Preparation of Black Amorphous Silica from Rice Husks. Transactions of the Indian Ceramic Society. 2001; 60(2): 95-99. doi: 10.1080/0371750x.2001.10799976
48.Mohd Joharudin NF, Abdul Latif N, Mustapa MS, et al. Effect of Burning Temperature on Rice Husk Silica as Reinforcement of Recycled Aluminium Chip AA7075. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences. 2020; 68(1): 125-132. doi: 10.37934/arfmts.68.1.125132
49.Joharudin NFM, Latif NA, Mustapa MS, Badarulzaman NA. Effects of untreated and treated rice husk ash (RHA) on physical properties of recycled aluminium chip AA7075. International Journal of Integrated Engineering, 2020; 12(1): 132-137.
50.Lee JH, Kwon JH, Lee J-W, et al. Preparation of high purity silica originated from rice husks by chemically removing metallic impurities. Journal of Industrial and Engineering Chemistry. 2017; 50: 79-85. doi: 10.1016/j.jiec.2017.01.033
51.Sun L, Gong K. Silicon-Based Materials from Rice Husks and Their Applications. Industrial & Engineering Chemistry Research. 2001; 40(25): 5861-5877. doi: 10.1021/ie010284b
52.Singh RP. Synthesis and characterisation of Al-Mg-SiO2 particulate composite prepared by nanostructured silica from rice husk ash. Materials Today: Proceedings. 2021; 37: 3148-3153. doi: 10.1016/j.matpr.2020.09.043
53.Prasad DS, Krishna AR. Production and mechanical properties of A356.2/RHA composites. International Journal of Advanced Science and Technology, 2011; 33: 51-58.
54.Pradhan MK, Tiwari S. Investigation of mechanical properties and electrical discharge machining of LM25-RHA metal matrix composite. International Journal of Machining and Machinability of Materials. 2017; 19(5): 457. doi: 10.1504/ijmmm.2017.087619
55.Soltani N, Bahrami A, Pech-Canul MI, et al. Surface modification of rice-husk ash (RHA) by Si3N4 coating to promote its wetting by Al-Mg-Si alloys. Materials Chemistry and Physics. 2018; 203: 223-234. doi: 10.1016/j.matchemphys.2017.10.009
56.Soltani N, Bahrami A, Pech-Canul MI, et al. Improving the Interfacial Reaction Between Cristobalite Silica from Rice Husk and Al–Mg–Si by CVD-Si3N4 Deposition. Waste and Biomass Valorization. 2019; 11(7): 3789-3799. doi: 10.1007/s12649-019-00706-w
57.Moosa A, Awad AY. Effect of rare earth addition on wear properties of aluminum alloy-rice husk ash/yttrium oxide hybrid composites. International Journal of Current Engineering and Technology, 2016; 6(3): 788-798.
58.Moosa A, Awad AY. Influence of rice husk ash-yttrium oxide addition on the mechanical properties behavior of aluminum alloy matrix hybrid composites. International Journal of Current Engineering and Technology, 2016; 6(3): 804-812.
59.Onsongo SK, Olukuru J, Munyao OM, et al. The role of agricultural ashes (rice husk ash, coffee husk ash, sugarcane bagasse ash, palm oil fuel ash) in cement production for sustainable development in Africa. Discover Sustainability. 2025; 6(1). doi: 10.1007/s43621-025-00841-6
60.Chinnamahammad Bhasha A, Balamurugan K. Fabrication and property evaluation of Al 6061 + x% (RHA + TiC) hybrid metal matrix composite. SN Applied Sciences. 2019; 1(9). doi: 10.1007/s42452-019-1016-0
61.Haque MH, Ahmed R, Khan M, Shahriar S. Fabrication, reinforcement and characterization of metal matrix composites (MMCs) using rice husk ash and aluminium alloy (A-356.2). International Journal of Scientific and Engineering Research, 2016; 7(3): 28-35.
62.Hossain MdR, Ali MdH, Amin MdA, et al. Fabrication and Performance Test of Aluminium Alloy-Rice Husk Ash Hybrid Metal Matrix Composite as Industrial and Construction Material. International Journal of Engineering Materials and Manufacture. 2017; 2(4): 94-102. doi: 10.26776/ijemm.02.04.2017.03
63.P. NANDA K, P.S.RAVI K, G. RANGA J, . Fabrication and Characteristics of AMC/RHA Functionally Graded Materials by Controlled Mold Filling. i-manager’s Journal on Material Science. 2016; 4(3): 12. doi: 10.26634/jms.4.3.8242
64.Sathiesh Kumar N. Fabrication and characterization of Al7075 / RHA /Mica composite by squeeze casting. Materials Today: Proceedings. 2021; 37: 750-753. doi: 10.1016/j.matpr.2020.05.769
65.Mohd Joharudin NF, Abdul Latif N, Mustapa MS, et al. Effect of amorphous silica by rice husk ash on physical properties and microstructures of recycled aluminium chip AA7075. Materialwissenschaft und Werkstofftechnik. 2019; 50(3): 283-288. doi: 10.1002/mawe.201800229
66.Deshmukh PY, Peshwe DR, Bhatt J, et al. Synthesis and Characterization of Al–Mg–SiO2 Particulate Composite Using Amorphous SiO2 from Rice Husk Ash. Transactions of the Indian Institute of Metals. 2011; 64(6): 575-581. doi: 10.1007/s12666-011-0083-8
67.Dwivedi SP, Sharma P, Saxena A. Utilization of waste spent alumina catalyst and agro-waste rice husk ash as reinforcement materials with scrap aluminium alloy wheel matrix. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. 2020; 234(6): 543-552. doi: 10.1177/0954408920930634
68.Deshmukh P, Pathak S. Influence of Varying SiO2 % on the Mechanical Properties of Al Based MMC. Transactions of the Indian Institute of Metals. 2012; 65(6): 741-745. doi: 10.1007/s12666-012-0196-8
69.Shaikh MBN, Arif S, Aziz T, et al. Microstructural, mechanical and tribological behaviour of powder metallurgy processed SiC and RHA reinforced Al-based composites. Surfaces and Interfaces. 2019; 15: 166-179. doi: 10.1016/j.surfin.2019.03.002
70.Siddharth D, Mahato N, Rao JB. Synthesis & characterization of RHA (Rice Husk Ash) particulates reinforced A7075 composites. Journal of Manufacturing Engineering, 2017; 12(2): 55-61.
71.Gladston JAK, Sheriff NM, Dinaharan I, Selvam JDR. Production and characterization of rich husk ash particulate reinforced AA6061 aluminum alloy composites by compocasting. Transactions of Nonferrous Metals Society of China, 2015; 25(3): 683-691.
https://doi.org/10.1016/S1003-6326(15)63653-6
72.Gladston JAK, Dinaharan I, Sheriff NM, et al. Dry sliding wear behavior of AA6061 aluminum alloy composites reinforced rice husk ash particulates produced using compocasting. Journal of Asian Ceramic Societies. 2017; 5(2): 127-135. doi: 10.1016/j.jascer.2017.03.005
73.Subrahmanyam APSVR, Naresh G, Venkatesu V. Microstructure and mechanical properties of rice husk ash reinforced aluminium alloy (A356.2) metal matrix composite. IOSR Journal of Engineering, 2018; 8: 36-42.
74.Dinaharan I, Kalaiselvan K, Murugan N. Influence of rice husk ash particles on microstructure and tensile behavior of AA6061 aluminum matrix composites produced using friction stir processing. Composites Communications. 2017; 3: 42-46. doi: 10.1016/j.coco.2017.02.001
75.Maji P, Ghosh SK, Nath RK, et al. Microstructural, mechanical and wear characteristics of aluminum matrix composites fabricated by friction stir processing. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2020; 42(4). doi: 10.1007/s40430-020-02279-5
76.Marini CD, Fatchurrohman N. Microstructure and hardness performance of AA6061 aluminium composite using friction stir processing. IOP Conference Series: Materials Science and Engineering. 2018; 342: 12077. doi: 10.1088/1757-899x/342/1/012077
77.Patil NA, Safwan A, Pedapati SR. Effect of deposition methods on microstructure and mechanical properties of Al 7075 alloy-rice husk ash surface composites using friction stir processing. Materials Today: Proceedings. 2020; 29: 143-148. doi: 10.1016/j.matpr.2020.05.639
78.Seetharaman S, Subramanian J, Singh RA, et al. Mechanical Properties of Sustainable Metal Matrix Composites: A Review on the Role of Green Reinforcements and Processing Methods. Technologies. 2022; 10(1): 32. doi: 10.3390/technologies10010032
79.Kashem A, Karim R, Das P, et al. Compressive strength prediction of sustainable concrete incorporating rice husk ash (RHA) using hybrid machine learning algorithms and parametric analyses. Case Studies in Construction Materials. 2024; 20: e03030. doi: 10.1016/j.cscm.2024.e03030
80.Shoba C, Ramanaiah N, Rao DN. Optimizing The Machining Parameters For Minimum Surface Roughness In Turning Al/6% SiC/6%RHA Hybrid Composites. Procedia Materials Science. 2015; 10: 220-229. doi: 10.1016/j.mspro.2015.06.044
81.Sathiparan N, Subramaniam DN. Optimizing fly ash and rice husk ash as cement replacements on the mechanical characteristics of pervious concrete. Sustainable Structures, 2025; 5(1): 100045.
https://doi.org/10.1016/j.susstr.2025.100045
82.Siva Prasad D, Shoba C. Hybrid composites–a better choice for high wear resistant materials. Journal of Materials Research and Technology. 2014; 3(2): 172-178. doi: 10.1016/j.jmrt.2014.03.004
83.Subrahmanyam APSVR, Madhukiran J, Naresh G, et al. Fabrication and Characterization of Al356.2, Rice Husk Ash and Fly Ash Reinforced Hybrid Metal Matrix Composite. International Journal of Advanced Science and Technology. 2016; 94: 49-56. doi: 10.14257/ijast.2016.94.05
84.Narasaraju G, Raju DL. Characterization of Hybrid Rice Husk and Fly ash-Reinforced Aluminium alloy (AlSi10Mg) Composites. Materials Today: Proceedings. 2015; 2(4-5): 3056-3064. doi: 10.1016/j.matpr.2015.07.245
85.Shoba C, Ramanaiah N, Rao DN. Influence of dislocation density on the residual stresses induced while machining Al/SiC/RHA hybrid composites. Journal of Materials Research and Technology. 2015; 4(3): 273-277. doi: 10.1016/j.jmrt.2014.12.010
86.Khan T, Wahab SABA, Chaudhuri M. Arsenic(III) immobilization on rice husk silica. 2011 National Postgraduate Conference. 2011: 1-4. doi: 10.1109/natpc.2011.6136347
87.Dwivedi SP, Srivastava A, Kumar A, Nandan B. Microstructure and mechanical behaviour of RHA and B4C reinforced aluminium alloy hybrid metal matrix composite. Indian Journal of Engineering & Materials Sciences, 2017; 24: 133-140.
88.Saravanan SD, Senthilkumar M. Mechanical behavior of aluminum (AlSi10Mg)-RHA composite. International Journal of Engineering and Technology, 2014; 5(6): 4834-4840.
89.Vasamsetti S, Dumpala L, Subbarao VV. Synthesis, characterization and hardness studies of nano rice husk ash reinforced Al6061 nanocomposites. Journal of Engineering Science and Technology, 2018; 13(9): 2916-2929.
90.D. Manoj Kumar et al., DMKeal, . Synthesis Characterization and Mechanical Behavior of Rice Husk Ash Reinforced Al-20mg 10 Cu Alloy Matrix Hybrid Composites. International Journal of Mechanical and Production Engineering Research and Development. 2018; 8(1): 111-118. doi: 10.24247/ijmperdfeb201813
91.Mishra P, Mishra P, Rana RS. Effect of Rice Husk ash Reinforcements on Mechanical properties of Aluminium alloy (LM6) Matrix Composites. Materials Today: Proceedings. 2018; 5(2): 6018-6022. doi: 10.1016/j.matpr.2017.12.205
92.Udoye NE, Fayomi OSI, Inegbenebor AO. Fractography and Tensile Properties of AA6061 Aluminium Alloy/Rice Husk Ash Silicon Nanocomposite. International Journal of Chemical Engineering. 2020; 2020: 1-8. doi: 10.1155/2020/8818224
93.Saravanan SD, Kumar MS. Effect of Mechanical Properties on Rice Husk Ash Reinforced Aluminum Alloy (AlSi10Mg) Matrix Composites. Procedia Engineering. 2013; 64: 1505-1513. doi: 10.1016/j.proeng.2013.09.232
94.Subrahmanyam APSVR, Narsaraju G, Rao BS. Effect of Rice Husk ash and Fly ash Reinforcements on Microstructure and Mechanical properties of Aluminium alloy (AlSi10Mg) Matrix Composites. International Journal of Advanced Science and Technology. 2015; 76: 1-8. doi: 10.14257/ijast.2015.76.01
96.Siva Prasad D, Shoba C. Experimental evaluation onto the damping behavior of Al/SiC/RHA hybrid composites. Journal of Materials Research and Technology. 2016; 5(2): 123-130. doi: 10.1016/j.jmrt.2015.08.001
97.Muralimohan R, Kempaiah UN, Seenappa. Influence of rice husk ash and B4C on mechanical properties of ADC 12 alloy hybrid composites. Materials Today: Proceedings. 2018; 5(11): 25562-25569. doi: 10.1016/j.matpr.2018.10.363
98.Ragupathi P, Kumar NS. Optimization of machining parameters for minimal temperature in cylindrical grinding of Al7075/RHA composite. Materials Today: Proceedings. 2021; 37: 745-749. doi: 10.1016/j.matpr.2020.05.760
99.Thiagarajan G, Abdul Latif N, Mohd Joharudin NF. Preliminary Study on Crystallinity of Rice Husk Ash Reinforcement for Metal Matrix Composite. Advanced Research in Natural Fibers, 2020; 2(1): 21-24.
100.Soltani N, Soltani S, Bahrami A, et al. Electrical and thermomechanical properties of CVI- Si3N4 porous rice husk ash infiltrated by Al-Mg-Si alloys. Journal of Alloys and Compounds. 2017; 696: 856-868. doi: 10.1016/j.jallcom.2016.12.051
101.Pattnayak A, Madhu N, Panda AS, et al. A Comparative study on mechanical properties of Al-SiO2 composites fabricated using rice husk silica in crystalline and amorphous form as reinforcement. Materials Today: Proceedings. 2018; 5(2): 8184-8192. doi: 10.1016/j.matpr.2017.11.507
102.Udoye NE, Inegbenebor AO, Fayomi OSI. Corrosion Performance and Wear Behaviour of AA6061 Reinforced Hybrid: Nano-Rice Husk Ash/Clay Particulate for Cooling Tower Fan Blade in 0.75 M H2SO4. Journal of Bio- and Tribo-Corrosion. 2020; 6(2). doi: 10.1007/s40735-020-00359-6
103.Ghosh S, Basak R, Rao AS. Study of Mechanical and Tribological Characteristics of Aluminium Alloy Reinforced with Rice Husk Ash. International Journal of Engineering Research & Technology, 2018; 7(6): 1-6
104.Senthilkumar M, Saravanan S, Shankar S. Dry sliding wear and friction behavior of aluminum–rice husk ash composite using Taguchi’s technique. Journal of Composite Materials. 2014; 49(18): 2241-2250. doi: 10.1177/0021998314545185
105.S SP, Sudhakaran R. Tribological Behavoiur of Silicon Carbide/ Rice Husk ash Reinforced Al7075 Hybrid Composites Using Optimization Techniques. International Journal of Engineering Research & Technology. 2021; 10(4): 1-8. doi: 10.21203/rs.3.rs-621659/v1
106.Saravanan SD, Senthilkumar M, Shankar S. Effect of Particle Size on Tribological Behavior of Rice Husk Ash–Reinforced Aluminum Alloy (AlSi10Mg) Matrix Composites. Tribology Transactions. 2013; 56(6): 1156-1167. doi: 10.1080/10402004.2013.831962
107.Verma N, Vettivel SC. Characterization and experimental analysis of boron carbide and rice husk ash reinforced AA7075 aluminium alloy hybrid composite. Journal of Alloys and Compounds. 2018; 741: 981-998. doi: 10.1016/j.jallcom.2018.01.185
108.Dwivedi SP, Mishra VR. Physico-Chemical, Mechanical and Thermal Behaviour of Agro-waste RHA-Reinforced Green Emerging Composite Material. Arabian Journal for Science and Engineering. 2019; 44(9): 8129-8142. doi: 10.1007/s13369-019-03784-z
109.Gaikwad SP, Kale PT, Gadhave SL. Corrosion and Wear Characteristics of A356.0-SiC-RHA Hybrid Composite. International Journal of Engineering Research and Technology, 2018; 7(4): 1-6.
110.Idusuyi N, Oviroh PO, Adekoya AH. A Study on the Corrosion and Mechanical Properties of an Al6063 Reinforced With Egg Shell Ash and Rice Husk Ash. In: ASME International Mechanical Engineering Congress and Exposition. 2018:52170.
111.Joseph OO, Dirisu JO, Atiba J, et al. Mechanical, and corrosive properties of AA7075 aluminium reinforced with rice husk ash particulates. Materials Research Express. 2023; 10(11): 116520. doi: 10.1088/2053-1591/ad0dd3
112.Nithyanandhan T, Sivaraman P, Ramamoorthi R, et al. Enhancement of corrosion behaviour of AL6061- B4C-RHA reinforced hybrid composite. Materials Today: Proceedings. 2020; 33: 372-377. doi: 10.1016/j.matpr.2020.04.167
113.Gaikwad SP. Comparison of Damping Characteristics of Aluminium A356.0 with Respect to Al-SiC-RHA Hybrid Composite. International Journal of Engineering Research, 2017; 7(5): 1-5.
114.Taniş NA, Okur O, Duran O, et al. An Investigation of Production and Properties of RHA Reinforced Hybrid Composites by Vacuum Infiltration Method. International Journal of Engineering Research and Development. 2021; 13(2): 704-710. doi: 10.29137/umagd.913816
115.Prasad DS, Shoba C, Ramanaiah N. Investigations on mechanical properties of aluminum hybrid composites. Journal of Materials Research and Technology. 2014; 3(1): 79-85. doi: 10.1016/j.jmrt.2013.11.002
116.Moulssewaran SK, Gopal E, Ramesh KPM, Ravikumar M, Sakthivel R. Structural And Thermal Study Of Aluminum Hybrid Composite Alloy Reinforced With Silicon Carbide And Rice Husk Ash For Automobile Brake Drum. Annals of the Faculty of Engineering Hunedoara, 2017; 15(4): 31-39.
117.Najib MAM, Ariff AHM, Tahir SM, et al. Microstructural, physical and mechanical analysis of rha pore modified porous alumina with aluminum as reinforcement. ASEAN Engineering Journal. 2019; 9(1): 29-43. doi: 10.11113/aej.v9.15506
118.Olorunyolemi OC, Ogunsanya OA, Akinwande AA, et al. Influence of SiO2 form the rice husk ash and coal fly ash particles on the mechanical behaviour and grain characteristics of the stir-casted hybrid composites. Materials Today: Proceedings. 2022; 62: 1234-1242. doi: 10.21203/rs.3.rs-1269445/v1
119.Tanis NA, Oku O, Duran O, Dele-Afolabi TT, Hanim MA, Calin R. An Investigation on the Properties of RHA and Al2O3 Reinforced Hybrid Composites. International Journal of Engineering Research and Development, 2019: 57-63.
120.Verma N, Vettivel SC, Rao P, et al. Processing, tool wear measurement using machine vision system and optimization of machining parameters of boron carbide and rice husk ash reinforced AA 7075 hybrid composite. Materials Research Express. 2019; 6(8): 0865f3. doi: 10.1088/2053-1591/ab25091.
121.Singh CV, Pachauri P, Dwivedi SP, et al. Formation of functionally graded hybrid composite materials with Al2O3 and RHA reinforcements using friction stir process. Australian Journal of Mechanical Engineering. 2019; 20(1): 141-154. doi: 10.1080/14484846.2019.1679583
122.Udoye NE, Nnamba OJ, Fayomi OSI, et al. Analysis on mechanical properties of AA6061/Rice husk ash composites produced through stir casting technique. Materials Today: Proceedings. 2021; 43: 1415-1420. doi: 10.1016/j.matpr.2020.09.178
123.Gupta V, Singh B, Mishra R. Tribological characteristics of AA7075 composites reinforced with rice husk ash and carbonized eggshells. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. 2021; 235(11): 2600-2613. doi: 10.1177/14644207211025810
124.Dwivedi SP, Dwivedi G. Utilization of RHA in development of hybrid composite by electromagnetic stir casting technique using RSM. Journal of Metals, Materials and Minerals. 2019; 29(4). doi: 10.55713/jmmm.v29i4.538
125.Dwivedi SP, Dwivedi G. Utilization of RHA in development of green composite material using RSM. Journal of the Mechanical Behavior of Materials. 2019; 28(1): 20-28. doi: 10.1515/jmbm-2019-0004
126.Kumar A, Kumar M. Mechanical and dry sliding wear behaviour of B4C and rice husk ash reinfroced Al 7075 alloy hybrid composite for armors application by using taguchi techniques. Materials Today: Proceedings. 2020; 27: 2617-2625. doi: 10.1016/j.matpr.2019.11.075
127.Saravanan SD, Kumar SS. Optimization of Casting Parameters on Al/RHA Composite Using Taguchi Method. Advanced Materials Research. 2014; 984-985: 291-296. doi: 10.4028/www.scientific.net/amr.984-985.291
128.Alyami, M., Alqahtani, A., Khan, M.A. and Ullah, S. Explainable machine learning for predicting compressive strength of rice husk ash concrete. Case Studies in Construction Materials, 2024; 20, p.e03125.
https://doi.org/10.1016/j.cscm.2024.e03125
129.Amin MN, Khan K, Abu-Arab AM, Al-Hasani A. Prediction of compressive strength of rice husk ash concrete using SHAP analysis and machine learning. Materials, 2023; 16(8): 3124
130.Kumar AP, Naik BJ, Rao CV, Rao SR. Optimization of casting parameters for casting of AL/RHA/RM hybrid composites using Taguchi method. International Journal of Engineering Trends and Technology, 2013; 4(8): 3284-3288.
131.Rattanasak U, Chindaprasirt P, Suwanvitaya P. Development of high volume rice husk ash alumino silicate composites. International Journal of Minerals, Metallurgy, and Materials. 2010; 17(5): 654-659. doi: 10.1007/s12613-010-0370-0
132.Uddin MN, Li L-Z, Deng B-Y, et al. Interpretable XGBoost–SHAP machine learning technique to predict the compressive strength of environment-friendly rice husk ash concrete. Innovative Infrastructure Solutions. 2023; 8(5). doi: 10.1007/s41062-023-01122-9
133.Virkunwar AK, Ghosh S, Basak R. Wear characteristics optimization of Al6061-Rice husk ash metal matrix composite using Taguchi method. Materials Today: Proceedings. 2019; 19: 546-550. doi: 10.1016/j.matpr.2019.07.731
