The effective drainage radius of coal seam is an important basis for the spacing of pre-drainage gas boreholes. To quickly and accurately determine the effective drainage radius, a new method was proposed. For the coal face where the desorbable gas content before mining has met the standard, the compliance of mine gas drainage rate was used as the basis to determine the effective drainage radius. The fluid-structure interaction model was constructed, numerical simulation of coal seam gas drainage was carried out by using COMSOL software, and the model was validated by combining the field test results. The results show that the new method has the advantage of short cycle. With the extension of drainage time, the increase of effective drainage radius gradually decreases, and finally reaches a relatively stable limit value, which conforms to the Langmuir function. The average error between numerical simulation and field test values of effective drainage radius is 4.9%, which proves that the model is reliable. This model can accurately predict the effective drainage radius under different coal seam gas contents and drainage times. The research results provide a new mean for determining the effective drainage radius of coal seam and the layout of gas drainage boreholes.

Biomass energy is abundant, clean, and carbon dioxide neutral, making it a viable alternative to fossil fuels in the near future. The release of syngas from biomass thermochemical treatments is particularly appealing since it may be used in a variety of heat and power generation systems. When a syngas with low tar and contaminants is required, downdraft gasifiers are usually one of the first gasification devices deployed. It is time-consuming and impractical to evaluate a gasification system's performance under multiple parameters, using every type of biomass currently available, which makes rapid simulation techniques with well-developed mathematical models necessary for the efficient and economical use of energy resources. This work attempts to examine, through model and experimentation, how well a throated downdraft gasification system performs when using pretreatment biomass feedstock that has been characterized. For the analyses, peanut shell (PS), a biomass waste easily obtained locally, was used. The producer gas generated with 9 mm PS pellets had a composition of 17.93% H2, 24.43 % CO, 12.47 % CO2, and 1.22% CH4 on a wet basis at the value of 0.3 equivalency ratio and 800 °C gasification temperature. The calorific value was found to be 4.96 MJ/Nm3. The biomass feedstock PS is found to be suitable for biomass gasification in order to produce syngas.