Industrial plastics have seen considerable progress recently, particularly in manufacturing non-lethal projectile holders for shock absorption. In this work, a variety of percentages of alumina (Al₂O₃) and carbon black (CB) were incorporated into high-density polyethylene (HDPE) to investigate the additive material effect on the consistency of HDPE projectile holders. The final product with the desired properties was controlled via physical, thermal, and mechanical analysis. Our research focuses on nanocomposites with a semicrystalline HDPE matrix strengthened among various nanocomposites. In the presence of compatibility, mixtures of variable compositions from 0 to 3% by weight were prepared. The reinforcement used was verified by X-ray diffraction (XRD) characterization, and thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) were used for thermal property investigation. Alumina particles increased the composites’ thermal system and glass transition temperature. Mechanical experiments indicate that incorporating alumina into the matrix diminishes impact resistance while augmenting static rupture stress. Scanning electron microscopy (SEM) revealed a consistent load distribution. Ultimately, we will conduct a statistical analysis to compare the experimental outcomes and translate them into mathematical answers that elucidate the impact of filler materials on the HDPE matrix.

ZnO nanostructures were obtained by electrodeposition on Ni foam, where graphene was previously grown by chemical vapor deposition (CVD). The resulting heterostructures were characterized by X-ray diffraction and SEM microscopy, and their potential application as a catalyst for the photodegradation of methylene blue (MB) was evaluated. The incorporation of graphene to the Ni substrate increases the amount of deposited ZnO at low potentials in comparison to bare Ni. SEM images show homogeneous growth of ZnO on Ni/G but not on bare Ni foam. A percent removal of almost 60% of MB was achieved by the Ni/G/ZnO sample, which represents a double quantity than the other catalysts proved in this work. The synergistic effects of ZnO-graphene heterojunctions play a key role in achieving better adsorption and photocatalytic performance. The results demonstrate the ease of depositing ZnO on seedless graphene by electrodeposition. The use of the film as a photocatalyst delivers interesting and competitive removal percentages for a potentially scalable degradation process enhanced by a non-toxic compound such as graphene.

Disease epidemics may spread quickly and easily throughout nations and continents in our current global environment, having a devastating effect on public health and the world economy. There are over 513 million people worldwide who have been infected, and more than 6.2 million have died due to SARS-CoV-2. There are treatments but no cures for most viruses. Nevertheless, the spread of viruses can be limited by introducing antiviral coatings on public area surfaces and personal protective equipment (e.g., face masks). This work aims to fabricate a polymer-based coating with acrylic resin as a binder that possesses great antiviral activity against the Feline coronavirus (FCov). The chosen polymer, polyethylene glycol (PEG), is used as an antiviral agent because it contains “green” chemistry benefits such as non-toxicity, being inexpensive, readily recyclable, safe, natural, non-flammable, biocompatible, and biodegradable. The PEG/acrylic coating systems of different weight percentages were coated on the glass substrates by the spray-coating method and cured at room temperature for 24 hours. The developed PEG/acrylic coating system that contains 20 wt% of PEG exhibits the highest anti-viral activities (99.9% against FCov) compared to the other weight percentages. From this study, it has been observed that the hydrophilicity of the coating plays an important role in its antiviral activity. The developed coating has a hydrophilic property, in which the contact angle was measured at 83.28 ± 0.5°. The FTIR reveals that there are no existing toxic components or new components contained in the coating samples.

Zero-valent iron is a moderately reducing reagent that is both non-toxic and affordable. In the present work, iron nanoparticles were synthesized using bitter guard leaf extract (Momordica charantia L.) (BGL-Fe NP). Using leaf samples from bitter protectant extract, iron nanoparticles were synthesized with secondary metabolites such as flavonoids and polyphenols acting as capping and reducing agents. Polyphenols reduce Fe²⁺/Fe³⁺ to nanovalent iron or iron nanoparticles. Iron nanoparticles were synthesized by reducing iron chloride as a precursor with bitter protective leaf extract in an alkaline environment. The obtained BGL-Fe NPs were calcined for 4 h at various temperatures of 400 °C, 500 °C, and 600 °C. The obtained samples were coded as BGL-Fe NPs-4, BGL-Fe NPs-5, and BGL-Fe NPs-6, respectively. The synthesized BGL-Fe NPs were systematically characterized by XRD, SEM, FTIR, UV-Vis and TG-DTA analysis. The obtained BGL-Fe NPs were then used as an adsorbent to remove the aqueous solution of basic methylene blue (MB) dye. MB concentration was monitored using UV-Vis spectroscopy.

Different color-promoting treatments were tested on table grape cv. “Flame Seedlees” to evaluate changes on flavonoids such as anthocyanins and the residual ethylene produced. Treatments were spray-applied at the onset of veraison. The control was Ethrel at 250 ppm (ETH), Salicylic Acid at 100 ppm (AS), Melatonin at 25 ppm (MEL) and 1:1 mixtures of ETH+AS, ETH+MEL and AS+MEL. The trials were conducted in triplicate after harvest, measuring Total Soluble Solids (% TSS), total acidity (% tartaric acid), pH, residual ethylene (ppm) and anthocyanin content (mg∙cm^-2). It was found that treatments ETH, AS, MEL and ETH+AS reached 16% TSS, standing out with lower values ETH +MEL (14.27%) and AS+MEL (15.17%) (p ≤ 0.05). ETH reached 0.83 ppm of residual ethylene, while a sum effect was appreciated in ETH+AS (0.5 ppm) and ETH+MEL (0.35 ppm), but not beneficial as it did not reflect quality characteristics. Only differences (p ≤ 0.05) in anthocyanin content were recorded between ETH (0.019 mg∙cm^-2) and AS+MEL (0.003 mg∙cm^-2). The subjective color of the grape bunches in the field made it possible to relate it to the objective results of the analyses performed. This research provides commercially important information on the substitution of Ethrel by natural compounds such as AS and MEL, as they show similar effects on the quality of “Flame Seedless” table grapes. In addition, these compounds do not have an ethylene residual greater than 0.2 mg/kg.

A problem in post-harvest of avocado (Persea americana Mill.) is the heterogeneity in fruit ripening, due to differences in the time of fruit set and the inability to ripen on the tree, a situation that causes inconsistencies in quality and differences in the response to preservation and processing technologies. In postharvest, the application of ethylene gas in hermetic chambers has been used to advance ripening; however, the use of ethylene releasers in liquid form (ethephon) has been proposed as an alternative, mainly for the treatment of low volumes of fruit. The present work was carried out in the production zone of Salvador Escalante (Michoacán, Mexico) with the objective of evaluating the effect of the application of two concentrations of ethephon on the time and homogenization of fruit ripening of avocado cultivars (cv.) Hass and Méndez. Fruits with 23.4% (cv. Hass) and 24% (cv. Méndez) of dry matter were harvested; one group was immersed in a solution of ethephon 500 mg/L and the other in 1,000 mg/L, both for 5 minutes; the treated fruits plus a control were stored at 20 °C for 11 days. Changes in respiration, ethylene production, weight loss, firmness, epicarp and pulp color, total phenol, chlorophyll and total carotenoid concentrations were evaluated. The results showed that ethephon doses of 1,000 mg/L in cv. Hass and 500 mg/L in cv. Méndez presented a ripening process 2 days earlier than the control.