The last decades have offered new challenges to researchers worldwide through the problems our planet is facing both in the environment protection field and the need to replace fossil fuels with new environmentally friendly alternatives. Bioenergy as a form of renewable energy is an acceptable option from all points of view and biofuels due to their biological origin have the ability to satisfy the new needs of humanity. By releasing some non-polluting combustion products into the atmosphere, biofuels have already been adopted as additives in traditional liquid fuels, being intended mainly for internal combustion engines of automobiles. The current work proposes an extension of biofuels application in combustion processes specific to industrial furnaces. This technical concern is not found in the literature, except for achievements of the research team involved in this work, which has performed previous investigations. A 51.5 kW-burner was designed to operate with glycerine originating from triglycerides of plants and animals, mixed with ethanol, an alcohol produced by the chemical industry recently used as an additive in gasoline for automobile engines. Industrial oxygen was chosen as the oxidizing agent necessary for the liquid mixture combustion, allowing to obtain much higher flame temperatures compared to the usual combustion processes using air. Mixing glycerine with ethanol in 8.8 ratio allowed growing flame stability, accentuated also by creating swirl currents in the flame through the speed regime of fluids at the exit from the burner body. Results were excellent both through the flame stability and low level of polluting emissions.

In order to replace conventional materials in the existing composite world, there has been a focus on adopting coir fibres, which are lightweight, adaptable, efficient, and have great mechanical qualities. This study describes the creation of environmentally responsible bio-composites with good mechanical characteristics that employ coir powder as a reinforcement, which has good interfacial integrity with an epoxy matrix. And these epoxy-coir composites supplemented with coir particles are predicted to function as a reliable substitute for traditional materials used in industrial applications. Here, untreated and alkali-treated coir fibres powder were employed as reinforcement, with epoxy resin serving as a matrix. An experimental investigation has been carried out to study the effect of coir powder reinforcement at different weight percentages (5 wt%, 10 wt%, 15 wt%, 20 wt%, 25 wt%, and 30 wt%). The morphological study, followed by a scanning electron microscope (SEM) and an optical microscope (OM), demonstrated that the powder and matrix had the strongest adhesion at 20 wt% coir powder-reinforced composite, with no voids, bubbles, or cracks. Based on the entire investigation, the polymer composite with 20 wt% reinforcement exhibited better mechanical qualities than the other combinations.

We develop a relatively cheap technology of processing a scrap in the form of already used tungsten-containing products (spirals, plates, wires, rods, etc.), as well not conditional tungsten powders. The main stages of the proposed W-scrap recycling method are its dispersing and subsequent dissolution under controlled conditions in hydrogen peroxide aqueous solution resulting in the PTA (PeroxpolyTungstic Acid) formation. The filtered solution, as well as the solid acid obtained by its evaporation, are used to synthesize various tungsten compounds and composites. Good solubility of PTA in water and some other solvents allows preparing homogeneous liquid charges, heat treatment of which yield WC and WC–Co in form of ultradispersed powders. GO (Graphene Oxide) and PTA composite is obtained and its phase transition in vacuum and reducing atmosphere (H₂) is studied. By vacuum-thermal exfoliation of GO–PTA composite at 170–500℃ the rGO (reduced GO) and WO_2.9 tungsten oxide are obtained, and at 700℃—rGO–WO₂ composite. WC, W₂C and WC–Co are obtained from PTA at high temperature (900–1000℃). By reducing PTA in a hydrogen atmosphere, metallic tungsten powder is obtained, which was used to obtain sandwich composites with boron carbide B₄C, W/B₄C, and W/(B₄C–W), as neutron shield materials. Composites of sandwich morphology are formed by SPS (Spark-Plasma Sintering) method.

This study aims to use dialectical thinking to explore the impacts and responses of Artificial Intelligence (AI) empowerment on students’ personalized learning. The effect of AI empowerment on student personalization is dissected through a literature review and empirical cases. The study finds that AI plays a significant role in promoting personalized learning by enhancing students’ learning effectiveness through intelligent recommendation, automated feedback, improving students’ independent learning ability, and optimizing learning paths, however, the wide application of AI also brings problems such as technological dependence, cheating in exams, weakening of critical thinking ability, educational fairness, and data privacy protection to students. The study proposes recommendations to strengthen technology regulation, enhance the synergy between teachers and AI, and optimize the personalized learning model. AI-enabled personalized learning is expected to play a greater role in improving learning efficiency and educational fairness.

Medicinal herbs have been extensively utilized in the remediation of various health conditions. Dialium guineense fruit pulp, also well known as Velvet Tamarind is widely consumed in West Africa for its dietary and medicinal properties. The study aims to analyze the phytochemical constituents, vitamin content and the in vitro antioxidant effect of Dialium guineense fruit pulp (DGFP). The phytochemical constituents, vitamins (C, E, B1-12) composition, and in vitro antioxidant activity were examined utilizing standardized analytical methods. The qualitative and quantitative phytochemical screening of the fruit pulp of Dialium guineense was also carried out; the result indicated the presence of flavonoids, alkaloids, saponins, tannins, terpenoids, phenols, steroids, and cardiac glycosides in varying concentrations. The vitamin composition revealed that vitamin C was higher than other vitamins in the fruit pulp. The DPPH (2,2-diphenyl-1-picrylhydrazyl) and nitric oxide scavenging assay showed high radical scavenging activity while the FRAP (Ferric reducing antioxidant power) assay revealed significant reducing power. This indicates that Dialium guineense fruit pulp has potential health benefits.

Hospital waste containing antibiotics is toxic to the ecosystem. Ciprofloxacin is one of the essential, widely used antibiotics and is often detected in water bodies and soil. It is vital to treat these medical wastes, which urge new research towards waste management practices in hospital environments themselves. Ultimately minimizes its impact in the ecosystem and prevents the spread of antibiotic resistance. The present study highlights the decomposition of ciprofloxacin using nano-catalytic ZnO materials by reactive oxygen species (ROS) process. The most effective process to treat the residual antibiotics by the photocatalytic degradation mechanism is explored in this paper. The traditional co-precipitation method was used to prepare zinc oxide nanomaterials. The characterization methods, X-Ray diffraction analysis (XRD), Fourier Transform infrared spectroscopy (FTIR), Ulraviolet-Visible spectroscopy (UV-Vis), Scanning Electron microscopy (SEM) and X-Ray photoelectron spectroscopy (XPS) have done to improve the photocatalytic activity of ZnO materials. The mitigation of ciprofloxacin catalyzed by ZnO nano-photocatalyst was described by pseudo-first-order kinetics and chemical oxygen demand (COD) analysis. In addition, ZnO materials help to prevent bacterial species, S. aureus and E. coli, growth in the environment. This work provides some new insights towards ciprofloxacin degradation in efficient ways.