Cobalt-based sulfides have emerged as promising candidates for next-generation high-performance anode materials for lithium-ion batteries (LIBs) due to their high theoretical specific capacity and reversible conversion reaction mechanisms. However, their practical application is hindered by volume expansion effects and relatively low rate performance. Guided by theoretical principles, this study synthesizes nanoscale Bi/CoS-C and Bi/Co₄S₃-C (denoted as Bi/CS-C) composite materials using Co and Bi₂S₃ as precursors via a solid-state ball milling method. The electrochemical properties of these materials were systematically investigated. When employed as anodes for LIBs, Bi/CoS-C and Bi/CS-C exhibit excellent rate capabilities. At current densities of 0.1, 0.5, 1, 4, and 10 A/g, the reversible capacities of Bi/CoS-C were 939.2, 730.7, 655.6, 508.1, and 319 mAh/g, respectively. In contrast, Bi/CS-C exhibited reversible capacities of 760.4, 637.6, 591.9, 484.3, and 295.4 mAh/g, respectively. Moreover, Co₄S₃, as an active component, enables superior long-cycle performance compared to CoS. After 300 cycles at 0.2 A/g, the Bi/CoS-C and Bi/CS-C electrodes retained capacities of 193.1 and 788.8 mAh/g, respectively. This study demonstrates that nanostructure design and carbon-based composite materials can effectively mitigate the volume expansion issue of cobalt-based sulfides, thereby enhancing their rate performance and cycling stability. This strategy provides new insights for the development of high-performance anode materials for lithium-ion batteries and is expected to accelerate their practical application in next-generation energy storage devices.

The pressing need to redefine the tourism industry’s relationship with nature and local communities has never been more critical. Ecotourism, as a paradigm of sustainable travel, holds transformative potential—not only for preserving our planet’s fragile ecosystems but also for fostering local cultural and economic development. In this context, the integration of circular economy principles offers innovative pathways to enhance sustainability across the tourism sector. The application of circular economy frameworks in tourism not only reduces environmental impact but also enhances economic viability by creating closed-loop systems. My interest in this topic stems from a personal conviction: Tourism should leave a positive mark, one that enriches rather than diminishes the destinations we visit. This study delves into how the hotel industry can align itself with ecotourism principles by embracing innovative, sustainable practices that minimize environmental impact while delivering authentic, high-quality experiences for travelers. Through the lens of green energy, resource optimization, and cultural integration, the research demonstrates that sustainability is both an ethical responsibility and a pathway to long-term competitiveness in tourism. By supporting local economies and protecting natural heritage, the industry can shift from being a passive observer of environmental degradation to a proactive steward of change. This work serves as a call to action for stakeholders: Our choices today will define the landscapes and cultural legacies available to future generations.

Lighting conditions in learning spaces can affect students’ emotions and influence their performance. This research seeks to verify the influence of classroom lighting on students’ academic performance under different conditions and measurement forms. The research method is based on the systematic review of research articles establishing case analyses characterizing lighting intensity and color temperature to determine ranges favorable to a higher level of attention and long-term memory. Also, this study shows relevant aspects of the cases representative of a sustainable solution and proposes a research model. The study found light intensity values between 350 and 1000 lux and color temperatures between 4000 and 5250 Kelvin that favor attention. Long-term memory reached the highest levels of measurement by analyzing different parameters sensitive to lighting conditions and questionnaires. In conclusion, it was demonstrated that an adequate light intensity and color temperature based on the greatest possible amount of natural light complemented with Light Emitting Diode (LED) light generates optimal lighting for the classroom, achieving energy efficiency in a sustainable solution and promoting student well-being and performance.

This study presents a comprehensive two-dimensional numerical analysis of natural laminar convection within a square cavity containing two circular heat sources, which simulate electric cables generating heat due to Joule heating. This scenario is particularly relevant in aeronautics, where excessive heating of electrical installations can lead to significant material and human safety risks. The primary objective of this research is to identify the optimal spacing between the two heat sources to mitigate the risk of overheating and ensure the safe operation of the electrical installation. To achieve this, various configurations were analyzed by adjusting the distance between the heat sources while also varying the Rayleigh number across a range from 10³ to 10⁶. The governing equations for the fluid flow and heat transfer were solved using a FORTRAN-based numerical code employing the finite volume method. The results indicate that the heat transfer characteristics within the cavity are significantly influenced by both the distance between the heat sources and the Rayleigh number. The analysis revealed that the average Nusselt number (Nu_avg) peaked at a value of 14.69 when the distance between the heat sources was set at 0.7 units and the Rayleigh number was at 10⁶. This finding suggests that maintaining this specific spacing between the electrical cables can optimize heat dissipation and enhance the safety of the installation. In conclusion, the study recommends adopting a spacing of 0.7 units between the electrical cables to ensure optimal thermal performance and minimize the risk of overheating, thereby safeguarding both the materials and personnel involved in aeronautical operations.

The article examines the issues of application and improvement of the methodology for evaluating industrial enterprises as recipients of state support within the framework of the implementation of industrial policy. The authors considered approaches to the content of industrial policy, investigated the factors influencing its efficiency, identified aspects of its imperfections that arise when applying an incomplete list of important parameters of economic development and ambiguity in the interpretation of previously applied estimates. The article presents proposals to improve the methodology for assessing potential recipients of state support based on the development of a comprehensive indicator for assessing enterprises (recipients of support), taking into account not only the classical parameters of the economic efficiency of industrial enterprises applying for state financial assistance, but also such aspects as the development of budgetary funds, belonging to priority sectors of the economy, characteristics of sustainable development and export and innovation potential. Combining the results of a comprehensive assessment of the recipient of state support with a map of the business demography of the territory allows making a decision not only about the fact of support and its efficiency, but also to predict the assessment of the life cycle of the enterprise and its subsequent development.

Mapping land use and land cover (LULC) is essential for comprehending changes in the environment and promoting sustainable planning. To achieve accurate and effective LULC mapping, this work investigates the integration of Geographic Information Systems (GIS) with Machine Learning (ML) methodology. Different types of land covers in the Lucknow district were classified using the Random Forest (RF) algorithm and Landsat satellite images. Since the research area consists of a variety of landforms, there are issues with classification accuracy. These challenges are met by combining supplementary data into the GIS framework and adjusting algorithm parameters like selection of cloud free images and homogeneous training samples. The result demonstrates a net increase of 484.59 km² in built-up areas. A net decrement of 75.44 km² was observed in forest areas. A drastic net decrease of 674.52 km² was observed for wetlands. Most of the wastelands have been converted into urban areas and agricultural land based on their suitability with settlements or crops. The classifications achieved an overall accuracy near 90%. This strategy provides a reliable way to track changes in land cover, supporting resource management, urban planning, and environmental preservation. The results highlight how sophisticated computational methods can enhance the accuracy of LULC evaluations.