Proper understanding of LULC changes is considered an indispensable element for modeling. It is also central for planning and management activities as well as understanding the earth as a system. This study examined LULC changes in the region of the proposed Pwalugu hydropower project using remote sensing (RS) and geographic information systems (GIS) techniques. Data from the United States Geological Survey's Landsat satellite, specifically the Landsat Thematic Mapper (TM), the Enhanced Thematic Mapper (ETM), and the Operational Land Imager (OLI), were used. The Landsat 5 thematic mapper (TM) sensor data was processed for the year 1990; the Landsat 7 SLC data was processed for the year 2000; and the 2020 data was collected from Operation Land Image (OLI). Landsat images were extracted based on the years 1990, 2000, and 2020, which were used to develop three land cover maps. The region of the proposed Pwalugu hydropower project was divided into the following five primary LULC classes: settlements and barren lands; croplands; water bodies; grassland; and other areas. Within the three periods (1990–2000, 2000–2020, and 1990–2020), grassland has increased from 9%, 20%, and 40%, respectively. On the other hand, the change in the remaining four (4) classes varied. The findings suggest that population growth, changes in climate, and deforestation during this thirty-year period have been responsible for the variations in the LULC classes. The variations in the LULC changes could have a significant influence on the hydrological processes in the form of evapotranspiration, interception, and infiltration. This study will therefore assist in establishing patterns and will enable Ghana's resource managers to forecast realistic change scenarios that would be helpful for the management of the proposed Pwalugu hydropower project.

An alternative to CMOS VLSI called Quantum Cellular Automata (QCA) is presently being researched. Although a few basic logical circuits and devices have been examined, very little, if any, research has been done on the architecture of QCA device systems. In the context of nano communication networks, data transmission that is both dependable and efficient is still critical. The technology known as Quantum Dot Cellular Automata (QCA) has shown great promise in the development of nano-scale circuits because of its extremely low power consumption and rapid functioning. This study introduces a unique nano-communication parity-based arithmetic circuit that is reversible, error-detecting, and error-correcting. The minimal outputs are needed for the proposed structure. Based on QCA technology, the proposed nano-communication network makes use of reversible logic gates. The performance increase of the suggested parity generator and checker circuit is significant in terms of clock delay, size, and number of cells.

Tomato powdery mildew, fruit rot, and twig blight are all managed with Deltamethrin. Its residues could still be present in the crops, posing a health risk. The pesticide residue analysis, dissipation rate, and safety assessments were thus examined in green tomatoes. The analytical method for residue analysis was validated according to international standards. Tomato fruits and soil were used to study the dissipation of Deltamethrin 100 EC (11% w/w) at 12.5 g a.i ha⁻¹ for the recommended dose (RD) and 25.0 g a.i ha⁻¹ for the double of the recommended dose (DD). Ethyl acetate was used to extract residues from tomato fruit, and PSA and magnesium sulphate were used for cleanup.The fruits had recoveries ranging from 83% to 93% and the soil sample from 81.67% to 89.6%, with the limit of detection (LOQ) estimated at 0.01 mg kg⁻¹. The matrix effect (ME) was calculated to be less than 20% for the tomato fruits and the soil.Half-lives for RD and DD were 1.95 and 1.84 days, respectively. All sampling days for both doses had dietary exposures of residues below the maximum permissible intake (MPI) of 0.16 mg person⁻¹ day⁻¹. The most effective method of decontaminating tomato residue containing Deltamethrin is blanching.

This study investigates the performance assessment of methanol and water as working fluid in a solar-powered vapour absorption refrigeration system. This research clarifies the system’s performance across a spectrum of operating conditions. Furthermore, the HAP software was utilized to determine and scrutinize the cooling load, facilitating a comparative analysis between software-based results and theoretical calculations. To empirically substantiate the findings, this research investigates methanol-water as a superior refrigerant compared to traditional ammonia- water and LiBr-water systems. Through experimental analysis and its comparison with previous research, the methanol-water refrigeration system demonstrated higher cooling efficiency and better environmental compatibility. The system’s performance was evaluated under varying conditions, showing that methanol-water has a 1% higher coefficient of performance (COP) compared to ammonia-water systems, proving its superior effectiveness in solar-powered applications. This empirical model acts as a pivotal tool for understanding the dynamic relationship between methanol concentration (40%, 50%, 60%) and system performance. The results show that temperature of the evaporator (5–15 ℃), condenser (30 ℃–50 ℃), and absorber (25 ℃–50 ℃) are constant, the coefficient of performance (COP) increases with increase in generator temperature. Furthermore, increasing the evaporator temperature while keeping constant temperatures for the generator (70 ℃–100 ℃), condenser, and absorber improves the COP. The resulting data provides profound insights into optimizing refrigerant concentrations for improved efficiency.

Nigeria plays important roles in the overall socio-economic development of the entire African continent, including entrepreneurial activities. There is a less focus on the immersion of women and youths in playing participatory roles in digital entrepreneurship and digital technology innovation in order to boost the economic growth of the country. The primary objective of this study is to explore women and youths’ immersion, specifically in connection with digital entrepreneurship and digital technology innovation, for the purpose of fostering the growth of the economy. The methodology employed in this study is Critical Content Analysis (CCA) of cursory literature as an integral part of the qualitative method. The literature was sourced through different databases, such as library sources, journals, and the core collection of Web of Science (WOS), and the collections of studies used for analysis were between 2018 and 2023. The results demonstrated that small and medium enterprises (SMEs) play significant roles in digital entrepreneurship activities in the country. In addition, there are various entrepreneurship programmes in the country, such as the Youth Entrepreneurship Development Programme (YEDP), and there is awareness of the effectiveness and efficiency of digital entrepreneurship. In addition, the result further established that the use of digital technology is an important innovation for the success of digital entrepreneurship in the country. The study further indicated that five factors of women and youths’ immersion in entrepreneurship (perception and opportunities, business performance, digital adoption, skill acquisition, and enabling environment) can boost the growth of the economy in the country. In conclusion, the knowledge and skills of entrepreneurs are major drivers of wealth and job creations, with women and youths playing an active role in the overall entrepreneurship programmes. It is suggested that the stakeholders and actors in entrepreneurship should collaborate to foster the participation of women and youths in entrepreneurship programmes in the country.