This paper presents a coupling of the Monte Carlo method with computational fluid dynamics (CFD) to analyze the flow channel design of an irradiated target through numerical simulations. A novel series flow channel configuration is proposed, which effectively facilitates the removal of heat generated by high-power irradiation from the target without necessitating an increase in the cooling water flow rate. The research assesses the performance of both parallel and serial cooling channels within the target, revealing that, when subjected to equivalent cooling water flow rates, the maximum temperature observed in the target employing the serial channel configuration is lower. This reduction in temperature is ascribed to the accelerated flow of cooling water within the serial channel, which subsequently elevates both the Reynolds number and the Nusselt number, leading to enhanced heat transfer efficiency. Furthermore, the maximum temperature is observed to occur further downstream, thereby circumventing areas of peak heat generation. This phenomenon arises because the cooling water traverses the target plates with the highest internal heat generation at a lower temperature when the flow channels are arranged in series, optimizing the cooling effect on these targets. However, it is crucial to note that the pressure loss associated with the serial structure is two orders of magnitude greater than that of the parallel structure, necessitating increased pump power and imposing stricter requirements on the target container and cooling water pipeline. These findings can serve as a reference for the design of the cooling channels in the target station system, particularly in light of the anticipated increase in beam power during the second phase of the China Spallation Neutron Source (CSNS Ⅱ).

Building cooling load depends on heat gains from the outside environment. Appropriate orientation and masonry materials play vital roles in the reduction of overall thermal loads buildings. A net-zero energy building performance has been analyzed in order to ascertain the optimum orientation and wall material properties, under the climatic conditions of Owerri, Nigeria. Standard cooling load estimation techniques were employed for the determination of the diurnal interior load variations in a building incorporating renewable energy as the major energy source, and compared with the situation in a conventionally powered building. The results show a 19.28% reduction in the building’s cooling load when brick masonry was used for the wall construction. It was observed that a higher heat gain occurred when the building faced the East-West direction than when it was oriented in the North-South direction. Significant diurnal cooling loads variation as a result of radiation through the windows was also observed, with the east facing windows contributing significantly higher loads during the morning hours while the west facing windows contributed higher amounts in the evening. The economic analysis of the net-zero energy building showed an 11.63% reduction in energy cost compared to the conventional building, with a 7-year payback period for the use of Solar PV systems. Therefore, the concept of net-zero energy building will not only help in energy conservation, but also in cost savings, and the reduction of carbon footprint in the built environment.

Design and procurement integration strategies in construction projects play an important role and have an impact on the overall project cycle. Integrated design and procurement will increase productivity and reduce waste. This research aims to provide a guide to good design and procurement integration strategies in Design and Build (DB) projects in government projects. This research uses qualitative and quantitative methods in the form of a schematic literature review followed by a Focus Group Discussion (FGD) with the Delphi method to formulate integrated design and procurement that improve project performance. In-depth interviews were conducted with 90 respondents to explore the implementation of the design and procurement strategy on the project used as a case study. The results of this research are recommendations for an integrated design and procurement strategy which can be used as a Standard Operating Procedure (SOP) in DB projects on government projects so that it can provide added value from the start of the project being designed through tenders. This research can be utilized by project stakeholders, academics and anyone who will develop project performance through the integrated design and procurement in the long term.

Relational database models offer a pathway for the storage, standardization, and analysis of factors influencing national sports development. While existing research delves into the factors linked with sporting success, there remains an unexplored avenue for the design of databases that seamlessly integrate quantitative analyses of these factors. This study aims to design a relational database to store and analyse quantitative sport development data by employing information technology tools. The database design was carried out in three phases: (i) exploratory study for context analysis, identification, and delimitation of the data scope; (ii) data extraction from primary sources and cataloguing; (iii) database design to allow an integrated analysis of different dimensions and production of quantitative indicators. An entity-relationship diagram and an entity-relationship model were built to organize and store information relating to sports, organizations, people, investments, venues, facilities, materials, events, and sports results, enabling the sharing of data across tables and avoiding redundancies. This strategy demonstrated potential for future knowledge advancement by including the establishment of perpetual data updates through coding and web scraping. This, in turn, empowers the continuous evaluation and vigilance of organizational performance metrics and sports development policies, aligning seamlessly with the journal’s focus on cutting-edge methodologies in the realm of digital technology.

This study explores the transformative role of art design interventions in the sustainable development and infrastructure enhancement of intangible cultural heritage, with a particular focus on honored brands. The research develops a framework that positions aesthetic and interactive art design interventions as pivotal components in revitalizing these brands. Aesthetic interventions translate the brand’s core philosophy, spirit, and values into compelling visual symbols, harmonizing cultural heritage with modern image design to elevate brand reputation and consumer preference. Interactive interventions enhance user experience, particularly among younger demographics, by integrating technological and entertainment-based engagement, thereby strengthening consumer loyalty and brand influence. The study further investigates how these art design interventions serve as catalysts for broader social development, contributing to the modern relevance and societal impact of time-honored brands. Additionally, it examines the impact of these interventions on sustainable development, societal support, and policy alignment. By weaving together these elements, the research underscores the critical importance of aligning brand strategies with societal goals, fostering environments where brands actively contribute to social welfare and sustainable growth. The findings offer valuable theoretical insights and practical strategies for the sustainable development of time-honored brands, providing clear directions for future research and practice.

Using multiple evaluation methods and systems give a comprehensive assessment. A computer-based multiple-choice assessment system was designed, implemented, posted online, and used to assess students as part of their final evaluation marks for a discipline. The online system of evaluation was intended to be used multiple times for evaluating the assimilation degree of a specific course at the end of the course. The data recorded for the period 2017–2023 with about 1400 distinct users were used to analyze the performance of the evaluation system. The system worked fine and a slight modification of it served well on remote evaluation during COVID-19 period. However, the upturn of mobile phone applications requires the creation of a system adapted to the new virtual reality.