Forest fire, as a discontinuous ecological factor of forest, causes the changes of carbon storage and carbon distribution in forest ecosystem, and affects the process of forest succession and national carbon capacity. Taking the burned land with different forest fire interference intensity as the research object, using the comparison method of adjacent sample plots, and taking the combination of field investigation sampling and indoor test analysis as the main means, this paper studies the influence of different forest fire interference intensity on the carbon pool of forest ecosystem and the change and spatial distribution pattern of ecosystem carbon density, and discusses the influence mechanism of forest fire interference on ecosystem carbon density and distribution pattern. The results showed that forest fire disturbance reduced the carbon density of vegetation (P < 0.05). The carbon density of vegetation in the light, moderate and high forest fire disturbance sample plots were 67.88, 35.68 and 15.50 t∙hm^-2, which decreased by 15.86%, 55.78% and 80.79% respectively compared with the control group. In the light, moderate and high forest fire disturbance sample plots, the carbon density of litter was 1.43, 0.94 and 0.81 t∙hm^-2, which decreased by 28.14%, 52.76% and 59.30% respectively compared with the control group. The soil organic carbon density of the sample plots with different forest fire disturbance intensity is lower than that of the control group, and the reduction degree gradually decreases with the increase of soil profile depth. The soil organic carbon density of the sample plots with light, moderate and high forest fire disturbance is 103.30, 84.33 and 70.04 t∙hm^-2 respectively, which is 11.670%, 27.899% and 40.11% lower than that of the control group respectively; the carbon density of forest ecosystem was 172.61, 120.95 and 86.35 t∙hm^-2 after light, moderate and high forest fire disturbance, which decreased by 13.53%, 39.41% and 56.74% respectively compared with the control group; forest fire disturbance reduced the carbon density of eucalyptus forest, which showed a law of carbon density decreasing with the increase of forest fire disturbance intensity. Compared with the control group, the effect of light forest fire disturbance intensity on the carbon density of eucalyptus forest was not significant (P > 0.05), while the effect of moderate and high forest fire disturbance intensity on the carbon density of eucalyptus forest was significant (P < 0.05).

Urban trees are one of the valuable storage in metropolitan areas. Nowadays, a particular attention is paid to the trees and spends million dollars per year to their maintenance. Trees are often subjected to abiotic factors, such as fungi, bacteria, and insects, which lead to decline mechanical strength and wood properties. The objective of this study was to determine the potential degradation of Elm tree wood by Phellinus pomaceus fungi, and Biscogniauxia mediteranae endophyte. Biological decay tests were done according to EN 113 standard and impact bending test in accordance with ASTM-D256-04 standard. The results indicated that with longer incubation time, weight loss increased for both sapwood and heartwood. Fungal deterioration leads to changes in the impact bending. In order to manage street trees, knowing tree characteristics is very important and should be regularly monitored and evaluated in order to identify defects in the trees.

The detection of urban expansion through digital processing of satellite images provides valuable information for understanding the dynamics of land use change and its spatial relationship with environmental factors. In order to apply or generate effective land-use planning policies, it is essential to have a historical record of the regional distribution of human settlements, an element that is practically non-existent in our country. For this reason, this text aims to determine the urban growth rate during the period 2000–2014 in the state of Hidalgo, Mexico, and to identify potential expansion zones from Landsat images. Six Landsat scenes were used for the spatial analysis of the state urban coverage and their relationship with the road influence area was evaluated. Two maps were obtained as cartographic products: one of urban coverage distribution and another of the municipalities with the greatest expansion, whose areas are located in the Valle del Mezquital region. However, Mineral de la Reforma, Tetepango, Tizayuca and Pachuca de Soto stand out for their growth rates during the study period: 183.44%, 102%, 94% and 68.5%, respectively. In total, the state urban area in-creased 72.3 km² from 2000 to 2014 with an average growth rate of 1.8% per year. Such growth was associated with the areas of influence of important road infrastructure, such as the Libramiento Arco Norte in Hidalgo. Therefore, the Mezquital Valley and the Mexico Basin are considered as potential regions for urban expansion in the state.

This contribution aims to appraise, analyze and evaluate the literature relating to the interaction of electromagnetic fields (EMF) with matter and the resulting thermal effects. This relates to the wanted thermal effects via the application of fields as well as those uninvited resulting from exposure to the field. In the paper, the most popular EMF heating technologies are analyzed. This involves on the one hand high frequency induction heating (HFIH) and on the other hand microwave heating (MWH), including microwave ovens and hyperthermia medical treatment. Then, the problem of EMF exposure is examined and the resulting biological thermal effects are illuminated. Thus, the two most common cases of wireless EMF devices, namely digital communication tools and inductive power transfer appliances are analyzed and evaluated. The last part of the paper concerns the determination of the different thermal effects, which are studied and discussed, by considering the governing EMF and heat transfer (or bio heat) equations and their solution methodologies.