Heat transfer augmentation procedures, such as Heat Transfer Enhancement and Intensification, are commonly used in heat exchanger systems to enhance thermal performance by decreasing thermal resistance and increasing convective heat transfer rates. Swirl-flow devices, such as coiled tubes, twisted-tape inserts, and other geometric alterations, are commonly used to create secondary flow and improve the efficiency of heat transfer. This study aimed to explore the performance of a heat exchanger by comparing its performance with and without the use of twisted-tape inserts. The setup consisted of a copper inner tube measuring 13 mm in inner diameter and 15 mm in outer diameter, together with an outer pipe measuring 23 mm in inner diameter and 25 mm in outer diameter. Mild steel twisted tapes with dimensions of 2 mm thickness, 1.2 cm width, and twist ratios of 4.3 and 7.2 were utilised. The findings indicated that the heat transfer coefficient was 192.99 W/m² °C when twisted-tape inserts were used, while it was 276.40 W/m² °C without any inserts. The experimental results closely aligned with the theoretical assumptions, demonstrating a substantial enhancement in heat transfer performance by the utilisation of twisted-tape inserts. The study provides evidence that the utilisation of twisted-tape inserts resulted in a nearly two times increase in the heat transfer coefficient, hence demonstrating their efficacy in augmenting heat transfer.

Despite noticeable research interest, the labor-intensive Readymade Garments (RMG) industry has rarely been studied from the perspective of workers’ productivity. Additionally, previous studies already generalized that rewards and organizational commitment lead to employee productivity. However, extant research focused on the RMG industry of Bangladesh, which consists of a different socio-cultural, economic, and political environment, as well as profusion dependency on unskilled labor with an abundance supply of it, hardly considered job satisfaction as a factor that may affect the dynamics of compensations or rewards, commitment, and employee productivity. To address this research gap, this study analyzes the spillover effect of compensation, organizational commitment, and job satisfaction on work productivity in Bangladesh’s readymade garments (RMG) industry. Besides, it delves into the analysis of job satisfaction as a mediator among these relationships. We examined the proposed model by analysing cross-sectional survey data from 475 respondents using the partial least squares-structural equation model in Smart PLS 4.0. The findings show that higher compensation and organizational commitment levels lead to higher levels of job satisfaction, leading to greater productivity. This research also discovered that job satisfaction is a mediator between compensation and productivity and commitment and productivity, respectively. Results further show that increased organizational commitment and competitive wages are the two keyways to boost job satisfaction and productivity in the RMG industry. Relying on the findings, this study outlines pathways for organizational policymakers to improve employee productivity in the labor-intensive industry in developing countries.

This study evaluates the influence of quality certificates on sustainable food production in Poland, considering economic, social, and environmental dimensions. Analyzing 25 different certificates, the research explores their criteria, procedures, and costs across various food product categories, including meat, fish, and plant-based products. The study provides a detailed review of certification processes, from initiation to audits and inspections. It identifies both commonalities and differences among certificates, each addressing unique aspects such as environmental impact, worker rights, and product origins. Despite the diversity in standards and procedures, the study underscores the need for standardized international criteria to improve transparency and meet consumer expectations, highlighting the significant role of quality certificates in advancing sustainable food production.

Encouraging the social empowerment of persons with disabilities—also known as “people of determination” is a crucial step toward advancing equality and inclusion in our communities. Consequently, the current study aimed to identify the mechanisms for activating social empowerment for people of determination from the deaf category. Identify the most prominent mechanisms and proposals from the point of view of the deaf. The study used a social survey approach based on a questionnaire on a sample of (30) deaf males in the Kuwaiti Sports Club for the Deaf, and it is the full sample size. The study reached several results, the most important of which are: integrating deaf people with disabilities into jobs integrated into society, raising the level of cultural awareness of sign language, in addition to spreading awareness of how to deal with deaf people. The study presented some recommendations and proposals, including media focus on the deaf group, and working to hold conferences and workshops targeting the community to spread awareness about the deaf group.

This article delves into the controversial practice of utilizing a student’s first language (L1) as a teaching resource in second language (L2) learning environments. Initially, strategies such as code-switching/code-mixing and translanguaging were considered signs of poor linguistic ability. There was a strong push towards using only the target language in foreign language education, aiming to limit the first language’s interference and foster a deeper immersion in the new language. However, later research has shown the benefits of incorporating the first language in bilingual education and language learning processes. It’s argued that a student’s knowledge in their native language can actually support their comprehension of a second language, suggesting that transferring certain linguistic or conceptual knowledge from L1 to L2 can be advantageous. This perspective encourages the strategic use of this knowledge transfer in teaching methods. Moreover, the text points to positive results from various studies on the positive impact of L1 usage in L2 classrooms. These insights pave the way for further exploration into the application of the first language in adult English as a Second Language (ESL)/English as a Foreign Language (EFL) education, particularly regarding providing corrective feedback.

The flipped classroom (FC) model has long brought significant benefits to higher education, secondary, and elementary education, particularly in improving the quality and effectiveness of learning. However, the implementation of FC model to support elementary students in developing self-learning skills (autonomous learning, independent study, self-directed learning) through technology still faces numerous challenges in Vietnam due to various influencing factors. Data for the study were collected through direct questionnaires and online surveys from 517 teachers at elementary schools in Da Nang, Vietnam. Based on SEM analysis, the study identified factors such as perceived usefulness, accessibility, desire, teaching style, and facilitating conditions. The research findings indicate that factors like the perceived effectiveness of the model, teaching style, and facilitating conditions have a positive correlation with the decision to adopt the FC model. Therefore, to encourage the use of the FC model in teaching, it is essential to raise awareness of the model’s effectiveness, improve teaching styles, and create favorable conditions for implementation.