The suspicion of mediastinal alterations, always includes in its initial study, the chest radiography. The identification of mediastinal alterations in the X-ray is a priority. The knowledge of the mediastinal references and the identification of their alterations allows the suspicion of a pathology specific to each of the mediastinal spaces. When the semiology of mediastinal lesions, their location and the three most frequent pathologies are taken into account, the possibility of having an etiological diagnosis increases^[1]. This is a review article based on a detailed literature search, in which radiological mediastinal references are studied, with emphasis on the epidemiological data of each one of them.

The present work shows an application of the Chan-Vese algorithm for the semi-automatic segmentation of anatomical structures of interest (lungs and lung tumor) in 4DCT images of the thorax, as well as their three-dimensional reconstruction. The segmentation and reconstruction were performed on 10 CT images, which make up an inspiration-expiration cycle. The maximum displacement was calculated for the case of the lung tumor using the reconstructions of the onset of inspiration, the onset of expiration, and the voxel information. The proposed method achieves appropriate segmentation of the studied structures regardless of their size and shape. The three-dimensional reconstruction allows us to visualize the dynamics of the structures of interest throughout the respiratory cycle. In the future, it is expected to have more evidence of the good performance of the proposed method and to have the feedback of the clinical expert, since the knowledge of the characteristics of anatomical structures, such as their dimension and spatial position, helps in the planning of Radiotherapy (RT) treatments, optimizing the radiation dose to cancer cells and minimizing it in healthy organs. Therefore, the information found in this work may be of interest for the planning of RT treatments.

A systemic and synthetic review of the anatomy of the temporomandibular joint in magnetic resonance imaging was developed for its evaluation. The temporomandibular joint is an anatomical structure composed of bones, muscles, ligaments and an articular disc that allows important physiological movements, such as mandibular opening, closing, protrusion, retrusion and lateralization. Magnetic resonance imaging is an imaging technique that does not use ionizing radiation and is more specific for the evaluation and interpretation of soft tissues, due to its high resolution, so it has an important role in the diagnosis of various maxillofacial pathologies, which is why the dentist should have knowledge of the structures and functions of the temporomandibular joint through magnetic resonance imaging. The review demonstrates the importance of magnetic resonance imaging in the study of the anatomy of the temporomandibular joint, in addition to mentioning the advantages provided by this imaging technique such as its good detail of the soft tissues in its different sequences and the non-use of ionizing radiation to obtain its images.

The effect of isocyanate trimer on the flame retardancy mechanism of polyisocyanurate (PIR) foam was studied in three aspects, including the mechanism of thermal decomposition in the condensed phase, the barrier mechanism of carbon layer formation on the surface in the condensed phase, and the mechanism in the gaseous phase, by using infrared spectroscopy, scanning electron microscopy, thermal analysis, a cone calorimeter, and high-temperature pyrolysis gas chromatography mass spectrometry. The results show that the trimmer can improve the thermal stability of the PIR foam and is not easily decomposed in the combustion. The trimmer can increase the carbon content of the PIR foam to 29.9% of that of the polyurethane (PU) foam. The carbon layer formed is denser, and it can retard heat and oxygen and thus improve the flame retardant properties; trimer can reduce the release of flammable polyol gas, decompose into more carbon dioxide, which is an inert gas, and it has certain flame retardant effects in the gaseous phase.

The conversion of the energy supply to renewable sources (wind, photovoltaics) will increase the volatility in electricity generation in the future. In order to ensure a balanced power balance in the power grid, storage is required - not only for a short time, but also seasonally. The bidirectional coupling of existing energy infrastructure with the power grid can help here by using the electricity in electrolysis systems to produce hydrogen. The hydrogen can be mixed with natural gas in the existing infrastructure (gas storage, pipelines) to a limited extent or converted directly to methane in a gas-catalytic reaction, methanation, with carbon dioxide and/or carbon monoxide. By using the natural gas infrastructure, the electricity grids are relieved and renewable energies can also be stored over long periods of time. Another advantage of this technology, known as “Power-to-Gas”, is that the methane produced in this way represents a sink for CO₂ emissions, as it replaces fossil sources and CO₂ is thus fed into a closed cycle.

Research in the field of Power-to-Gas technology is currently addressing technological advances both in the field of electrolysis and for the subsequent methanation, in particular to reduce investment costs. In the field of methanation, load-flexible processes are to be developed that are adapted to the fluctuating supply of hydrogen. The profitability of the Power-to-Gas process chain can be increased through synergistic integration into existing industrial processes. For example, an integrated smelting works offers a promising infrastructural environment, since, on the one hand, process gases containing carbon are produced in large quantities and, on the other hand, the oxygen as a by-product from the water electrolysis can be used directly. Such concepts suggest an economic application of Power-to-Gas technology in the near future.

Prepolymers containing isocyanates must be prevented from curing when exposed to moisture, which can be achieved by blocking the isocyanate groups with a suitable agent. The study carefully examines several blocking agents, including methyl ethyl ketoxime (MEKO), caprolactam, and phenol, and concludes that methyl ethyl ketoxime is the best choice. Spectroscopic and thermal analyses, as well as oven curing studies, are conducted with various blocking agents and isocyanate prepolymer to castor oil ratios, revealing MEKO to be the most effective blocking agent which gets unblocked at higher temperatures.