In this paper, the characteristic behavior of the disc consisting of thermoplastic composite CF/PA6 material was considered. Analysis was made by taking into account the usage areas of the materials and referring to certain temperatures between 30 ℃ and 150 ℃. Composite materials are lightweight; they show high strength. For these reasons, they are preferred in technology, especially in the aircraft and aerospace industry. With this study, the radial and tangential stresses determined within a certain temperature The temperatures were determined and compared with previous studies in the literature. According to the results obtained, it is believed that the thermoplastic composite CF/PA6 disc design can be used in engineering.

In the recent years, with global warming and the change in climatic characteristics, buildings and interior arrangements in dry and cold climates, that previously did not have cooling problems, now require built and pre-planned cooling systems as well as heating. On the other hand, the enormous increase in energy consumption and the rapid depletion of energy resources causes concern and anxiety for future generations. In this regard, utilizing natural resources and incorporating sustainable solutions into building design are critical. Vernacular technical systems and design ideas can still be accepted and applied to create sustainable solutions. In this context, design strategies for energy efficiency and provision of physical and spatial comforts could be considered based on traditional architecture. In this study, sustainable building design solutions that have been used in Iran’s vernacular houses, which has four distinct climate zones, aimed to create a paradigm for the general modern passive house designs in the global context. Traditional Iranian residential architecture incorporates architectural features for physical, spatial, and climatic needs, as well as aesthetic comfort for the user. In this manner, user needs and interior space organization in vernacular residential architecture can be considered as a sustainable housing model that meets today’s technology requirements in passive house design.

To investigate the possible role of arbuscular mycrrhizal fungi (AMF) in alleviating the negative effects of salinity on Stevia rebaudiana (Bert.), the regenerated plantlets in tissue culture was transferred to pots in greenhouse and inoculated with Glomus intraradices. Salinity caused a significant decrease in chlorophyll content, photosynthesis efficiency and enhanced the electrolyte leakage. The use of AMF in salt –affected plants resulted in improved all above mentioned characteristics. Hydrogen peroxide and malondialdehyde (MDA) contents increased in salt stressed plants while a reduction was observed due to AMF inoculation. CAT activity showed a significant increase up to 2 g/l and then followed by decline at 5 g/l NaCl in both AMF and non-AMF treated stevia, however, AMF inoculated plants maintained lower CAT activity at all salinity levels (2 and 5 g/l). Enhanced POX activities in salt- treated stevia plants were decreased by inoculation of plants with AMF. The addition of NaCl to stevia plants also resulted in an enhanced activity of SOD whilst, AMF plants maintained higher SOD activity at all salinity levels than those of non-AMF inoculated plants. AMF inoculation was capable of alleviating the damage caused by salinity on stevia plants by reducing oxidative stress and improving photosynthesis efficiency. 

The study focused on investigating the effects of varying levels of HA (HA₁ = 0, HA₂ = 25, HA₃ = 50, HA₄ = 75, and HA₅ = 100) on Red Dragon, Red Prince, and Red Meat varieties of red radish. This analysis aimed to unravel the relationship between different levels of HA and their impact on the growth and productivity of red radish genotypes. The findings revealed that the Red Prince genotype attained the utmost plant height of 24.00 cm, an average of 7.50 leaves per plant, a leaf area of 23.11 cm², a canopy cover of 26.76%, a leaf chlorophyll content of 54.60%, a leaf fresh weight of 41.16 g, a leaf dry weight of 8.20 g, a root length measuring 9.73 cm, a root diameter of 3.19 mm, a root fresh weight of 27.60 g, a root dry weight of 6.75 g, and a remarkable total yield of 17.93 tons per hectare. The implications of this study are poised to benefit farmers within the Dera Ismail Khan Region, specifically in the plain areas of Pakistan, by promoting the cultivation of the Red Prince variety.

Orientation: Rewards are integral to keeping employees happy, efficient and engaged in their work. Thus, the engagement of academic staff within higher education institutions has become a top priority for organisational productivity and competitiveness. Research purpose: This study investigated the impact of total rewards on work engagement among the academic staff at a South African higher education institution. Motivation for the study: Engagement of academic staff is vital as higher education institutions are influential in the country’s development. Literature, however, has shown that most studies on total rewards and work engagement focus on sectors such as financial institutions, the mining industry and others. However, few reports have been on total rewards and work engagement in higher education. Research design, approach and method: This study employed a cross-sectional survey design, following a quantitative approach. From a population of 100 academic staff, 74 respondents responded to a self-administered questionnaire. Main findings: The results show a positive relationship between two dimensions of total rewards (work-home integration and quality work environment) and work engagement. However, no relationship was found between base pay, benefits, performance and career management, and work engagement. From the five dimensions of total rewards, a quality work environment was the only significant predictor of work engagement. Contribution: The study provides theoretical contributions through new literature and possible recommendations. The study may guide management in developing a rewards strategy that can promote staff work engagement.

Introduction: Many detrimental effects on employees’ health and wellbeing might result from inadequate illumination in the workplace. Headaches and trouble focusing can result from eye strain brought on by inadequate illumination. The purpose of this study was to simulate and optimize workplace illumination in the ceramic industry. Materials and methods: A common Luxmeter ST-1300 was used to measure the illumination in seven workplaces at a height of 100 cm above the floor. DIALux evo version 7.1 software was used to simulate the illumination of workplaces. To optimize the illumination conditions, a numerical experiment design consisting of 16 scenarios was used for each of the workplaces. Four factors were considered for each scenario: luminaire height, number of luminaires, luminous flux, and light loss factor. The Design-Expert program version 13.0.5.0 was applied for developing the scenarios. Finally, by developing quadratic models for each workplace, the optimization process was implemented. Results: Every workplace had illumination levels that were measured to be between 250 and 300 lux. Instead of using compact fluorescent luminaires, LED technology was recommended to maximize the illumination conditions for the workers. Following optimization, 376 lux of illumination were visible at each workstation in every workspace. For the majority of the workspaces, the simulated illumination was expected to have a desirability degree greater than 0.9. The uniformity and illumination of the workplace were significantly impacted by the two factors of luminaire height and luminaire count. Conclusion: The primary outcomes of this optimization were the environmental, political, and socioeconomic ones, including reduced consumption power, high light flux, and environmental compatibility. Nonetheless, the optimization technique applied in this work can be applied to the design of similar situations, such as residential infrastructure.