The growing of plants hydroponically is a soilless form of growing in modern day agriculture. It helps to make feed available for animals throughout the season since it is not affected by what is faced by field grown crops. The use of animal waste, that is, their faeces, in the growth of forage was compared with commercial hydroponics solutions as a way of looking for a reduction in the cost incurred in the purchase of commercial hydroponics solutions. The study evaluated the use of organic nutrient solutions (ONS) alongside a standard/commercial nutrient solution in growing crops hydroponically on the growth, dry matter yield, water use efficiency, and chemical composition of hydroponic maize fodder. The ONS used were formulated from the dried faeces of cattle, poultry, rabbits, and swine. The prepared organic nutrient solutions with the control were used in growing the maize seeds for 10 days, and growth, yield, and chemical composition were determined. Results show the highest (196 g) dry matter yield for maize hydroponic fodder irrigated with poultry ONS. Similarly, maize irrigated with poultry ONS was significantly (P < 0.05) higher in CP content, while it was not significantly different from maize irrigated with cattle, swine, and commercial solutions. A lower water use efficiency value (0.19 kg DM/m³) was recorded for maize irrigated with cattle ONS. According to the study, irrigating maize with different organic nutrient solutions produced maize fodder with a higher yield and a similar chemical composition as the commercial nutrient solution. 

Increasing the environmental friendliness of production systems is largely dependent on the effective organization of waste logistics within a single enterprise or a system of interconnected market participants. The purpose of this article is to develop and test a methodology for evaluating a data-based waste logistics model, followed by solutions to reduce the level of waste in production. The methodology is based on the principle of balance between the generation and beneficial use of waste. The information base is data from mandatory state reporting, which determines the applicability of the methodology at the level of enterprises and management departments. The methodology is presented step by step, indicating data processing algorithms, their convolution into waste turnover efficiency coefficients, classification of coefficient values and subsequent interpretation, typology of waste logistics models with access to targeted solutions to improve the environmental sustainability of production. The practical implementation results of the proposed approach are presented using the production example of chemical products. Plastics production in primary forms has been determined, characterized by the interorganizational use of waste and the return of waste to the production cycle. Production of finished plastic products, characterized by a priority for the sale of waste to other enterprises. The proposed methodology can be used by enterprises to diagnose existing models for organizing waste circulation and design their own economically feasible model of waste processing and disposal.

The present study demonstrates the fabrication of heterogeneous ternary composite photocatalysts consisting of TiO₂, kaolinite, and cement (TKCe),which is essential to overcome the practical barriers that are inherent to currently available photocatalysts. TKCe is prepared via a cost-effective method, which involves mechanical compression and thermal activation as major fabrication steps. The clay-cement ratio primarily determines TKCe mechanical strength and photocatalytic efficiency, where TKCe with the optimum clay-cement ratio, which is 1:1, results in a uniform matrix with fewer surface defects. The composites that have a clay-cement ratio below or above the optimum ratio account for comparatively low mechanical strength and photocatalytic activity due to inhomogeneous surfaces with more defects, including particle agglomeration and cracks. The TKCe mechanical strength comes mainly from clay-TiO₂ interactions and TiO₂-cement interactions. TiO₂-cement interactions result in CaTiO₃ formation, which significantly increases matrix interactions; however, the maximum composite performance is observed at the optimum titanate level; anything above or below this level deteriorates composite performance. Over 90% degradation rates are characteristic of all TKCe, which follow pseudo-first-order kinetics in methylene blue decontamination. The highest rate constant is observed with TKCe 1-1, which is 1.57 h⁻¹ and is the highest among all the binary composite photocatalysts that were fabricated previously. The TKCe 1-1 accounts for the highest mechanical strength, which is 6.97 MPa, while the lowest is observed with TKCe 3-1, indicating that the clay-cement ratio has a direct relation to composite strength. TKCe is a potential photocatalyst that can be obtained in variable sizes and shapes, complying with real industrial wastewater treatment requirements.

Hospital waste containing antibiotics is toxic to the ecosystem. Ciprofloxacin is one of the essential, widely used antibiotics and is often detected in water bodies and soil. It is vital to treat these medical wastes, which urge new research towards waste management practices in hospital environments themselves. Ultimately minimizes its impact in the ecosystem and prevents the spread of antibiotic resistance. The present study highlights the decomposition of ciprofloxacin using nano-catalytic ZnO materials by reactive oxygen species (ROS) process. The most effective process to treat the residual antibiotics by the photocatalytic degradation mechanism is explored in this paper. The traditional co-precipitation method was used to prepare zinc oxide nanomaterials. The characterization methods, X-Ray diffraction analysis (XRD), Fourier Transform infrared spectroscopy (FTIR), Ulraviolet-Visible spectroscopy (UV-Vis), Scanning Electron microscopy (SEM) and X-Ray photoelectron spectroscopy (XPS) have done to improve the photocatalytic activity of ZnO materials. The mitigation of ciprofloxacin catalyzed by ZnO nano-photocatalyst was described by pseudo-first-order kinetics and chemical oxygen demand (COD) analysis. In addition, ZnO materials help to prevent bacterial species, S. aureus and E. coli, growth in the environment. This work provides some new insights towards ciprofloxacin degradation in efficient ways.

The study is devoted to the problem of processing the organic waste that is generated as a result of paper, textiles and other industries production as well as food waste. The growth of economic activity in Kazakhstan has resulted in a significant challenge with regard to industrial waste management. The accumulation of waste on the territory of the country has reached 31.72 billion tonnes, comprising approximately 2.5 billion tonnes of hazardous waste, 50 million tonnes of phosphorus-containing waste, over 2.5 million tonnes of lead-zinc waste and more than 120 million tonnes of solid domestic waste. The study object was the Shymkent-Kokys polygons. According to the research carried out, it was determined that the titer of microorganisms of the studied groups is 1–10 CFU/g in the soils selected around the garbage in the area of the Shymkent landfill. The titer of microorganisms in the soil horizons was high at a depth of 20–30 cm and the titer were 10⁹ cells/mL. The structure of the soil microbiome obtained around the Shymkent Waste Landfill consists of actinomycetes, micromycetes, heterotrophic bacteria, nitrifying, nitrogen-fixing bacteria, enterobacteria, as well as algae and protozoa. It was found that strains KPA1, KPA2 Pseudomonas sp. strains KPA3, KPA4, KPA5 Bacillus sp. isolated from the soils of the Shymkent-Kokys landfill are able to recycle domestic waste with a high content of cellulose and organic substances up to 95%–97%. The findings can be used to develop more effective organic cellulosic waste management strategies and improve the environmental sustainability of various industries.

The urban solid waste (USW) emanating from the increasing urbanisation calls for concern. Integrating cart pushers into the private sector participation (PSP) may bridge the lacuna in sub-urban planning and PSP truck inefficiencies, especially in developing countries. There is a paucity of studies concerning cart pushers’ role in sub-urban and issues hindering them from achieving Sustainable Development Goals (1 and 11) in developing countries. Thus, the study seeks to appraise cart pushers’ role in Nigeria’s sub- and urban areas, investigate their challenges, and propose measures to improve the achievement of the Goals by integrating them into PSP waste management systems. The researchers utilised a qualitative approach using face-to-face interviews and observation. The study covered seven of Nigeria’s major cities, including Lagos, Kano, and Abuja. Forty semi-structured interviews were conducted. The participants include selected waste managers, NGOs in waste-related matters, cart pushers, legislators, households, environment and housing experts, and solid waste government agencies/regulators. The researchers adopted a thematic approach to analyse the collected data and presented it in a theme pattern. Findings reveal that despite the significance of cart pushers to the three pillars of sustainable development, including stimulating support for potential employment creation and sustainable cities and communities in Nigeria, they face challenges in their daily operation. The study proposed a revised USWM policy, where the informal waste sector should be embraced and recognised with specific rules and regulations. This is germane to improve achieving SDGs 1 and 11. This study holds significant implications for USWM policymakers and other stakeholders in embracing and integrating cart pushers into the formal waste collection process supported by statutory regulations to enhance practice. Also, this concept will increase employment opportunities and improve achieving Goals 1 and 11 in Nigeria.