A theoretical investigation of the effect of an inverse parabolic potential on third harmonic generation in cylindrical quantum wires is presented. The wave functions are obtained as solutions to Schrödinger equation solved within the effective mass approximation. It turns out that peaks of the third harmonic generation susceptibility (THGS) associated with nanowires of small radii occur at larger photon energies as compared to those associated with quantum wires of larger radii. The inverse parabolic potential red-shifts peaks of the THGS, and suppresses the amplitude of the THGS. THGS associated with higher radial quantum numbers is diminished in magnitude and blue-shifted, as a function of the photon energy. As a function of the inverse parabolic potential, the THGS still characterized by peaks, and the peaks shift to lower values of the potential as the photon energy increases.

This work is a part of research on the microstructure and mechanical properties of Cr-Ni-Si steels after various thermal treatments [1, 2]. The need to minimize damage and losses caused by emerging failures in complex engineering facilities such as nuclear, thermal and hydroelectric power stations, and gas and oil pipelines necessitates the creation of materials of high strength, plasticity, welding and high rigidity.

Attempts were made in the present study to design and develop skeletally modified ether linked tetraglycidyl epoxy resin (TGBAPSB), which is subsequently reinforced with different weight percentages of amine functionalized mullite fiber (F-MF). The F-MF was synthesized by reacting mullite fiber with 3-aminopropyltriethoxysilane (APTES) as coupling agent and the F-MF structure was confirmed by FT-IR. TGBAPSB reinforced with F-MF formulation was cured with 4,4’-diamino diphenyl methane (DDM) to obtain nanocomposite. The surface morphology of TGBAPSB-F-MF epoxy nanocomposites was investigated by XRD, SEM and AFM studies. From the study, it follows that these nanocomposite materials offer enhancement in mechanical, thermal, thermo-mechanical, dielectric properties compared to neat (TGBAPSB) epoxy matrix. Hence we recommend these nanocomposites for a possible use in advanced engineering applications that require both toughness and stiffness.

In the current work, it was investigated to the K X-ray fluorescence efficiency and chemical effect on vacancy transfer probability for some tin compounds. We used Br₂Tin, TinI₂, SeTin, TinF₂, TinSO₄, TinCl₂, TinO and TinS compounds for experimental study. The target samples were irradiated with ²⁴¹Am annular radioactive source at the intensity of 5 Ci which emits gamma rays at wavelength of 0.2028 nm. The characteristic x-rays emitted because of the excitation are collected by a high-resolution HPGe semiconductor detector. It has been determined that the experimental calculations of the tin (Sn) element are compatible with the theoretical calculation. In addition, we have calculated the experimental intensity ratios, fluorescence yields and total vacancy transfer probabilitiesfor other Sn compounds. 

In this paper silver nanoparticles (NPs) which are synthesized by a simple plasma arc discharge method, that is a kind of electrochemical methods, are examined. The method is very simple and silver NPs are obtained very fast by means of two polished silver plates and electrochemical cell. The effects of changing some terms of the experiment including using Hydrogen peroxide (H₂O₂), temperature and the medium of experiment on oxygen percent and crystalline structure of silver NPs have been studied by transmission electron microscopy, UV-visible spectrophotometery, and X-ray diffraction. Water medium gets larger nanoparticles with less oxygen content compare to air medium. The size of synthesized nanoparticles become smaller and they also become more spherical by using H₂O₂ in air medium. In water medium, the size and concentration of the silver crystallite increase by temperature growth and adding H₂O₂  respectively. 

In this paper, an improved mathematical model for flashover behavior of polluted insulators is proposed based on experimental tests. In order to determine the flashover model of polluted insulators, the relationship between conductivity and salinity of solution pollution layer of the insulator is measured. Then, the leakage of current amplitude of four common insulators versus axial, thermal conductivity and arc constants temperature was determined. The experimental tests show that top leakage distance (TLd) to bottom leakage distance (BLd) ratio of insulators has a significant effect on critical voltage and current. Therefore, critical voltage and current were modeled by TLd to BLd ratio Index (M). Also, salinity of solution pollution layer of the insulators has been applied to this model by resistance pollution parameter. On the other hand, arc constants of each insulator in new model have been identified based on experimental results. Finally, a mathematical model is intended for critical voltage against salinity of solution pollution layer of different insulators. This model depends on insulator profile. There is a good agreement between the experimental tests of pollution insulators obtained in the laboratory and values calculated from the mathematical models developed in the present study.