Heat transfer fluids (HTFs) are critical in numerous industrial processes (e.g., the chemical industry, oil and gas, and renewable energy), enabling efficient heat exchange and precise temperature control. HTF degradation, primarily due to thermal cracking and oxidation, negatively impacts system performance, reduces fluid lifespan, and increases operational costs associated with correcting resulting issues. Regular monitoring and testing of fluid properties can help mitigate these effects and provide insights into the health of both the fluid and the system. To date, there is no extensive literature published on this topic, and the current narrative review was designed to address this gap. This review outlines the typical operating temperature ranges for industrial heat transfer fluids (i.e., steam, organic, synthetic, and molten salts) and then focuses specifically on organic and synthetic fluids used in industrial applications. It also outlines the mechanisms of fluid degradation and the impact of fluid type and condition. Other topics covered include the importance of fluid sampling and analysis, the parameters used to assess the extent of thermal degradation, and the management strategies that can be considered to help sustain fluid and system health. Operating temperature, system design, and fluid health play a significant role in the extent of thermal degradation, and regular monitoring of fluid properties, such as viscosity, acidity, and flash point, is crucial in detecting changes in condition (both early and ongoing) and providing a basis for decisions and interventions needed to mitigate or even reverse these effects. This includes, for example, selecting the right HTF for the specific application and operating temperature. This article concludes that by understanding the mechanisms of thermal degradation and implementing appropriate management strategies, it is possible to sustain the lifespan of thermal fluids and systems, ensure safe operation, and help minimise operational expenditure.

This research investigates the effects of drying on some selected vegetables, which are Telfaria occidentalis, Amaranthu scruentus, Talinum triangulare, and Crussocephalum biafrae. These vegetables were collected fresh, sliced into smaller sizes of 0.5 cm, and dried in a convective dryer at varying temperatures of 60.0 °C, 70.0 °C and 80.0 °C respectively, for a regulated fan speed of 1.50 ms‒1, 3.00 ms‒1 and 6.00 ms‒1, and for a drying period of 6 hours. It was discovered that the drying rate for fresh samples was 4.560 gmin‒1 for Talinum triangulare, 4.390 gmin‒1for Amaranthu scruentus, 4.580 gmin‒1 for Talinum triangulare, and 4.640 gmin‒1 for Crussocephalum biafrae at different controlled fan speeds and regulated temperatures when the mass of the vegetable samples at each drying time was compared to the mass of the final samples dried for 6 hours. The samples are considered completely dried when the drying time reaches a certain point, as indicated by the drying rate and moisture contents tending to zero. According to drying kinetics, the rate of moisture loss was extremely high during the first two hours of drying and then steadily decreased during the remaining drying duration. The rate at which moisture was removed from the vegetable samples after the drying process at varying regulated temperatures was noted to be in this trend: 80.0 °C > 70.0 °C > 60.0 °C and 6.0 ms‒1 > 3.0 ms‒1 > 1.5 ms‒1 for regulated fan speed. It can be stated here that the moisture contents has significant effects on the drying rate of the samples of vegetables investigated because the drying rate decreases as the regulated temperatures increase and the moisture contents decrease. The present investigation is useful in the agricultural engineering and food engineering industries.

The heat extraction from the conventional channels under two-phase flow boiling conditions with water as the coolant is investigated numerically in this work. The numerical investigation was carried out by using ANSYS Fluent 2022R1 commercial software by selecting the Rensselaer Polytechnic Institute (RPI) wall heat flux partitioning approach by employing the Eulerian-Eulerian two-phase model. A three-dimensional computational domain was used for the simulation to understand the fluid boiling inside the conventional channel under steady state conditions, focusing on the effect of aspect ratio (AR) on the vapor volume fraction. The simulations were performed for a constant mass flux of 150.46 kg/m2-s with the heat flux value ranging from 10-100 kW/m2 and at the inlet subcooled temperatures of 303K, 313K and 323K. The temperature of the channel bottom surface and the heat transfer coefficient (HTC) obtained numerically were compared with the experimental results and it was found that the results matched well. The volume of vapor fraction increased with the increase in heat flux for all values of inlet subcooled temperature considered in this study for all the test sections. At low inlet subcooled temperature, the volume of vapor fraction decreased with an increase in AR at all heat fluxes. However, there was no observable trend at higher heat flux and high inlet subcooled temperature.

In response to the prevailing energy crisis, this research focuses on elevating the potential of lithium niobate (LN) thin films for advanced optoelectronic applications. Employing electron beam evaporation, films undergo precise annealing (700°C to 1100°C), revealing a structural evolution through X-ray diffraction—crystallite sizes transition from 69.34 nm (unannealed) to 47.90 nm (1100°C). Scanning electron microscopy captures the transformation from coarse grains to photonic crystal clusters, while energy dispersion X-ray analysis discloses LN's composition (97.27 wt.% oxygen, 2.73 wt.% niobium). Rutherford backscattering spectroscopy illustrates surface damage post-Helium ion implantation, proportionate to depth. UV-VIS spectrophotometry highlights a significant blue shift in the optical band gap (3.70 eV to 2.52 eV), with further reduction at 700°C (2.48 eV) and a climactic shift at 1100°C (2.68 eV). This study not only addresses the pressing energy crisis but also emphasizes the indispensable role of lithium niobate in shaping the future of optoelectronics. It provides insights into tailoring LN properties for sustainable advancements in optoelectronic devices, marking a crucial chapter in our collective journey towards energy resilience. The urgency of innovation in the face of global challenges is underscored, marking a crucial chapter in our collective journey towards energy resilience.

A new method has been proposed to estimate top heat losses of vertical flat plate liquid/air collectors with double glazing. Empirical relations have been developed for the temperatures of glass covers, thus facilitating the calculation of individual heat transfer coefficients. The values of individual heat transfer coefficients therefore obtained can be used in the proposed analytical equation for the estimation of the top heat loss coefficient of the vertical collector with double glazing. The analytical equation has been developed for collector tilt angle of 60 to 90 degrees, plate temperature of 323 K to 423 K, absorber coating emittance of 0.1 to 0.95, air gap spacing of 20 mm to 50mm between the plate and inner glass cover, air gap spacing of 20 mm to 50mm between glass covers, wind heat transfer coefficient of 5 W/m2K to 30 W/m2K, and ambient temperature of 263K to 313K. The accuracy of the analytical equation has been validated for the said range of variables in comparison to numerical solutions, and the values of the top heat loss coefficient are found to be within 2.5 percent compared to numerical solutions.

The two-phase flow in micro/mini channels is of fundamental importance for many interesting applications, such as cooling of micro-electronic components and devices by a compact heat exchanger, material processing and thin-film deposition technology, bioengineering, and biotechnology. This article discusses significant developments made in the past ten years by researchers in the fields of pool boiling and convective boiling, using water, nanofluids, and refrigerants as the working fluids. The literature's data is examined in terms of improvements and declines in the critical heat flow and nucleate boiling heat transfer.Conflicting data have been presented in the literature on the effect that nanofluids/refrigerants have on the boiling heat-transfer coefficient; however, almost all the researchers have noted an enhancement in the critical heat flux during nanofluid/refrigerant boiling. Several researchers have observed nanoparticle deposition at the heater surface, which they have related to the critical heat flux enhancement.

A large number of publications devoted to a new class of materials - high-entropy alloys (HEA), is associated with their unique chemical, physical and mechanical properties both in cast materials and in various classes of coatings and refractory compounds. As a result of the research, the features of solid-soluble high-entropy alloys based on BCC and FCC phases have been revealed. These include the role of the most refractory element in the formation of the lattice parameter, the relationship of distortion with elastic deformation, and the contribution of the enthalpy of mixing to the strength and modulus of elasticity. This made it possible, on the basis of Hooke's law, to propose a formula for determining the hardness of the HEA based on the BCC and FCC phases. Based on the fact that with an increase in temperature in high-entropy alloys, the values of the modulus of elasticity, distortion and enthalpy of mixing will obey the same laws, a formula is proposed for determining the yield strength depending on the test temperature of solid-soluble HEA based on BCC and FCC phases. A formula based on the role of the most fusible metal in the alloy is proposed to calculate the melting point of solid-soluble materials.

Based on the application of phase diagram calculation technique (CALPHAD), the Fe-Nd-B magnetic materials were investigated, and alloy design and microstructure evolution concerning. According to the thermodynamic database of Fe-Nd-B ternary system, the equilibrium solidification process of Fe78Nd15B7 alloy is simulated, and we explained well the reason of this experimental phenomenon by the metastable extension of the equilibrium phase diagram.